Page 2
STEP Pg. 4 ..GLUE EZ-WRAP TO THE SOCKET BRIM STEP WARM, THEN DON THE EZ-ACCESS DAWSKIN Pg. 5 Warming the DAWSKIN makes it much easier to pull over the heel and onto the leg. STEP USE WITH AN EXPULSION VALVE? Pg.
Page 5
STEP Pg. 4 GLUE EZ-WRAP TO THE SOCKET BRIM 1. Pull the tubular EZ-Wrap over socket brim far enough down so that the DAWSkin, when pulled up, will overlap EZ-Wrap the bottom edge of the EZ-Wrap by at least 1in (3cm). 2.
Page 6
Use of a heat gun will damage the DAWSKIN (cracking will occur, though it will not be immediately apparent). 2. Don the EZ-Access DAWSKIN as you would a stocking. While still warm, carefully stretch DAWSKIN over the heel. Then pull fully up the leg all the way above the socket brim.
Need help?
Do you have a question about the EZ-Access DAWSKIN and is the answer not in the manual?
Questions and answers