Office Star Products work smart EMH5102JR5 Operating Instructions

FAUTEUIL PRÉSIDENT EN MAILLES
ÉTAPE 1 ÉTAPE 2
9
4
3
1
2
ÉTAPE 4
3
Enlever toutes les pièces du carton, les organiser selon les numéros de pièce indiqués sur la liste et vous assurer que les quantités
des pièces sont correctes.
ÉTAPE 1 Insérer cinq Roulettes (2) dans la Base (1), les pousser très fort jusqu'à ce que vous entendiez ou sentiez la Roulette (2) s'enclencher. Insérer le
Vérin pneumatique (3) dans la Base (1). Glisser le Soufflet (4) sur le Vérin pneumatique (3).
ÉTAPE 2 Fixez le Dossier (6) au Coussin du siège (5) avec quatre Vis longues (10). RESSERRER COMPLÈTEMENT TOUTES LES VIS AVEC
LE CLÉ ALLEN (10).
ÉTAPE 3 Fixez les Bras (7L et 7R) au Coussin du siège (5) avec trois Vis courtes (9) pour chaque Bras (7). RESSERRER COMPLÈTEMENT
TOUTES LES VIS AVEC LE CLÉ ALLEN (10).
ÉTAPE 4 Placer le siège assemblé sur le vérin pneumatique (3) et mettre de la pression.
ATTENTION : AVANT D'UTILISER LE FAUTEUIL, VOUS ASSURER D'AVOIR RESSERRÉ
COMPLÈTEMENT TOUTES LES VIS.
EMH5102JR5 / EMH5102JG5
INSTRUCTIONS DE MONTAGE
ÉTAPE 3
5
6
PIÈCE
1. Base . . . . . . . . . . . . . . . . . . . . . . . 1
2. Roulettes . . . . . . . . . . . . . . . . . . . . 5
3. Vérin pneumatique . . . . . . . . . . . . 1
4. Soufflet . . . . . . . . . . . . . . . . . . . . . 1
5. Coussin du siège . . . . . . . . . . . . . . 1
6. Dossier . . . . . . . . . . . . . . . . . . . . . 1
7. Bras (7L et 7R) . . . . . . . . . . . . . . . 2
9. Vis courte . . . . . . . . . . . . . . . . . . . . 6
10. Vis longue . . . . . . . . . . . . . . . . . . 4
11. Clé Allen (non montré) . . . . . . . . . 1
8
7L
5
7R
QTÉ
LIMITED WARRANTY
Work Smart chairs are warranted from the date of purchase against failure due to material and workmanship as follows:
• 15 Years on all non-moving metal parts.
• 5 Years on component parts including Control mechanisms, pneumatic cylinders, wood, plastic parts, base and casters.
• 3 Years on upholstery fabric and foam against wear and deterioration.
• We cannot warrant leather against routine scratching and scuffing, as all leather is subject to minor blemishes in use.
To make a warranty claim, contact Parts Department. Provide model number, proof of purchase, description of the problem and
obtain return authorization. At it's option Office Star Products will:
(a) Supply compatible components of current manufacture.
(b) Repair the customer's component. The customer must prepay freight on any components returned to the factory. Return
freight on components still in warranty will be paid by Office Star Products.
*All warranties are limited to the original purchaser for normal commercial usage defined as a standard forty hour work week by persons weighing 250 lbs. or
less. This warranty will not cover labor, freight or damage from misuse, abuse, negligence, alteration, accident, vandalism, rusting, acts of nature or any other
event beyond the control of Office Star Products. The warranty does not cover cosmetic damage that may result from normal use. Liability for incidental or
consequential damages is excluded. The user assumes all risk of injury resulting from use of this product. When usage is more than 40 hours per week, a two
year warranty on all parts applies. Fabric and foam is warranted for one year. This warranty gives you specific legal rights, and you may also have other rights
which vary from state to state.
Our quality standards are among the highest in the industry. Sometimes, no matter how hard we try, there are times when parts
are damaged or missing. Our Parts Department will do everything possible to promptly remedy the problem. Contact us via e-mail
parts@officestar.net, by Fax 1-909-930-5629, or toll free parts number 1-800-950-7262, Monday through Friday 8:00 a.m. - 5:00
p.m. Pacific Time.
© Office Star Products Décembre 2013
EMH5102JR5 / EMH5102JG5
WOVEN MESH BACK CHAIR
OPERATING INSTRUCTIONS
FEATURES
• PNEUMATIC SEAT HEIGHT ADJUSTMENT
To raise seat remove pressure from seat and lift lever (1).
To lower seat height sit on chair and lift lever (1).
NOTE: It is normal for chair to slightly lower under
body weight.
• LOCKING TILT ADJUSTMENT
For individual comfort, this chair has been equipped with an
adjustment that will allow the user to change the tension of
the tilting feature. Turn knob (3) clockwise to increase tension
4
and counter-clockwise to decrease or ease the tension. To
lock return chair to the upright position and pull lever (2) up. To
unlock push
lever (2) down.
NOTE: Be careful not to loosen the back tilt adjustment knob
completely.
• ARM HEIGHT ADJUSTMENT
3
To adjust arm height, push button (4) in to allow the arms to
move up or down freely. Release the button (4) once the desired
height is reached.
• ARM FLIP UP AND DOWN
To flip arms up, simply pull up on arm. To lower arm, simply pull
down on arm.
WARNING
1. Use this product only one person at a time.
2. Do not use this chair unless all bolts screws and knobs are
securely tightened.
3. Check that all bolts screws and knobs are tight every three
months or as needed.
2
4. Do not overturn back tilt knob when decreasing tension.
5. Dispose of packing material properly. Do not use plastic cover
as head covering. It may cause suffocation.
1
6. Do not use chair as a stepladder.
7. Use this chair for its intended purpose only.
8. Use mild detergent only for cleaning.