Advertisement
RET1020
Retina Vandal Proof IR Dome Camera
with SONY High Resolution CCD Sensor
SPECIFICATIONS
Model
Pick Up Element
Effective Picture Elements (H*V)
Horizontal Resolution
S/N Ratio
Clock Frequency (MHz)
Scanning System
Minimum Illumination
Synchronous System
Auto Electronic Shutter
Gama Characteristic
IR Distance
IR Status
IR Power On
Video Output
Auto Gain Control
Power/Current
Lens
Water Resistance
Dimensions
Weight
Storage Temperature
Operating Temperature
TROUBLESHOOTING
1.
No picture after providing power.
Possible power supply voltage abnormality. Check for proper power supply voltage
and polarity. Ensure that all the connecting cables and monitors are hooked up
properly.
2.
Interference (hum bars) are moving through the picture.
Check the monitor and peripheral equipment used.
3.
The picture background changes color continuously.
The fluorescent light's electromagnetic field can cause color roll. This is a normal
phenomenon. Reduce the number of fluorescent lights, or increase the distance
between the camera and the fluorescent lights.
4.
The picture quality is poor or "fuzzy"
This is usually due to poor quality cables or poor connections. Ensure that all the
connecting cables and monitors are hooked up properly, or switch to higher quality
connecting cables.
USER MANUAL
RET1020
SONY 1/3¨ CCD
NTSC: 768x494 PAL: 752x582
540 TV Lines
>54dB
NTSC: 19.0699 PAL: 18.9375
2:1 Interface
0 Lux (with IR LED ON)
Internal, Negative sync.
NTSC: 1/60~1/100,000 PAL: 1/50~1/100,000
0.45
30m (with 36 Unit Infrared LED)
<10 Lux by CDS
CDS Auto Control
1 Vpp, 75 Ohm
Auto
12V DC (±10%) / 400mA
4-9mm (optional)
IP65
ø131 x 93(H) mm
1.76 lbs
-30~+60˚C RH 95% Max
-10~+50˚C RH 95% Max
LIMITED WARRANTY
This warranty remains in effect for one year from the date of purchase. Except as speci-
fied below, this warranty covers all defects in material and workmanship. The following
are not covered: Damaged caused by accident, misuse, abuse, product modification or
neglect, damage occurring during shipment, damage from failure to follow instructions
contained in the owner's instruction booklet, damage resulting from the performance of
repairs by someone not authorized by Retina Security Equipment, or any claims based on
misrepresentations by the seller. This warranty does not cover incidental or consequen-
tial damages. It does not cover the cost of removing or reinstalling the unit. This warranty
is void if the serial number has been removed or defaced.
This warranty gives you specific legal rights. You may also have other rights which vary
from state to state. Some states do not allow the exclusion or limitations of incidental or
consequential damages or limitation on how long an implied warranty lasts so the above
may not apply to you.
HOW TO OBTAIN SERVICE
Please call us at (800) 844-9555 Monday – Friday 8am – 5pm. Central Standard Time.
We may direct you to an authorized dealer/technician or request that you return the prod-
uct for repair. You must present the original bill of sale to establish the date of purchase.
Please do not ship your product to us for repair without prior authorization. You are
responsible for transportation of your product and payment of any shipping charges. If
the repairs are covered under warranty, we will pay the return shipping charges.
NOTE: Do not attempt to disassemble the camera. Doing so may void your warranty. No
user-serviceable parts inside.
Advertisement
