UNI-BRIGHT E477171 Quick Start Manual

Easy DMX512 Decoder

Parameter

Part No. Input Voltage
DMXREC-DIN 12-36VDC

Product Size

53.0
DMXREC-DIN
5
Standard DMX512 compliant control interface, enable to set the DMX
address freely. And show address Via digital numueric display.
Three-channel/ four-channel output selectable.
Two types available(Constant Voltage, Constant Current),suitable for
different LED lamps.
To work with power repeater to expand output power unlimitedly.
Compatible with DMX1RGBW
Output Current Output Power
constant voltage
4x5A 4x(60-180)W
65.0

Wiring diagram

DMX Master
E477171

Using instruction

Operation

Through buttons to set desired DMX512 address, 1 key is to set "hundreds" position, 2 is to set "ten" position, 3
is to set "a" bit.
Remarks
To open the connection of DMX512 controller, then it can work correctly.

Choose Channel

Press button " 2 "and button " 3" at the same time for 2 seconds, cH digital display flashes, then press button"1"
to choose 3/4, 3 means total 3 channels, 4 means total 4 channels. Press any button for >2 seconds to confirm
the 3 or 4 channels. The factory preset default is 4 channels outputs.

Set DMX address

Press 1st button for 2 seconds, digital display flashes to set the required DMX address, then press any button
for >2 seconds to confirm.

Choose PWM frequency

Press 1st button and 3rd button for 2 seconds, digital display flashes to show P-c.
P means PWM frequency, press 1st to show "1", means 1500Hz, "2" means 200Hz.
c means dimming options, press 3rd to show "1", means logarithmic dimming, "2" means linear dimming.
The factory preset default is PWM frequency 200Hz with linear dimming. 2-2
D- D+ D- D+ GND V+ V-
Power input
DMXREC-DIN
DMX512 Decoder
0-5 0-9 0-9
W- B- G- R- +
RGB/W or CDW LED strip
"3" button
"2" button
"1" button