Table of Contents
Advertisement
en Troubleshooting
Fault
Plastic parts are discol-
oured.
Removable streaks are
present on glasses, glass-
ware with a metallic appear-
ance and cutlery.
Irreversible clouding of
glassware.
48
Cause
Tableware has been pre-
cleaned too intensely. The
sensors chose a weaker pro-
gramme. Stubborn soiling
cannot be entirely removed.
Amount of rinse aid to be
dispensed is set too high.
No rinse aid has been ad-
ded.
Detergent residue is present
in the final rinse. Lid of the
detergent dispenser is
blocked by tableware items
and will not open fully.
Tableware has been pre-
cleaned too intensely. The
sensors chose a weaker pro-
gramme. Stubborn soiling
cannot be entirely removed.
Glasses are not dishwasher-
proof, only suitable for dish-
washers.
troubleshooting
Only remove large remnants of food
▶
and do not prerinse tableware.
Set the rinse aid system to a lower
▶
setting.
→ "Adding rinse aid", Page 25
▶
Arrange tableware in the top basket
1.
tableware so the tab collecting tray
is not obstructed by tableware.
→ "Arrange tableware", Page 30
Items of tableware are blocking the
dispenser lid.
Do not place tableware or fra-
2.
grance dispensers in the tablet col-
lecting tray.
Only remove large remnants of food
▶
and do not prerinse tableware.
Use dishwasher-proof glasses.
▶
Glasses are usually only suitable for
use in a dishwasher, i.e. long-term
wear or long-term changes must be
expected.
Avoid a lengthy steam phase
▶
(standing time after wash cycle
ends).
Use a programme with a lower tem-
▶
perature.
→ "Programmes", Page 17
Set the softening system to the wa-
▶
ter hardness.
Use detergent with a glass protec-
▶
tion component.
Advertisement
Table of Contents
