Related Manuals for SENSECAP M2
Summary of Contents for SENSECAP M2
- Page 1 SenseCAP Quick Start for SenseCAP Gateway & Sensors This tutorial will guide you to use the SenseCAP M2 Multi-Platform gateway connect to SenseCAP LoRaWAN® sensors.
-
Page 2: Table Of Contents
2.2 Log in to the APP ..............9 2.3 Bind the gateway to the APP ..........9 3. Set up the SenseCAP Sensors via SenseCAP Mate APP ..... 11 3.1 Power on the sensor ............. 11 3.2 Select your device type ............11 3.3 Select the frequency plan ............. -
Page 3: Gateway Network Configuration
SenseCAP 1.Gateway Network Configuration Connect the antenna and power adaptor to the gateway. The power LED will show in red, and in about 15s indicator on the top will flash green, indicating that the gateway is booting. There are two ways to connect to the Internet. Choose the one that works for you. -
Page 4: Connect To Wifi
SenseCAP 1.2 Connect to WIFI Step 1: Turn on the device AP hotspot Press the button for 5s until the blue indicator flashes slowly to enter the configuration mode. Step 2: Connect to the AP hotspot AP hotspot name is SenseCAP_XXXXXX (6-figure MAC address),default password is... - Page 5 SenseCAP Step 3: Get your device Username and Password You can find the Username and Password on your device label. Step 4: Log in to the Local Console Input the IP Address (192.168.168.1) in your browser to enter the Local Console.
- Page 6 SenseCAP Step 5: Connect to a WIFI Click on Network - Wireless Click on the Scan button to scan the WIFI.
- Page 7 SenseCAP Select your WI-FI to join the network. The indicator on the top will show solid green if the gateway is successfully connected to the WIFI.
-
Page 8: Poe Connection
SenseCAP 1.3 POE connection SenseCAP M2 supports PoE (Power on Ethernet) and is compatible with IEEE 802.3 standard. Note: You will need to have an extra PoE switch that provides 40V-57V DC power as a PSE (Power Sourcing Equipment) if your modem/router does not support PoE. -
Page 9: Checking The Gateway Connection Status
Gateway not connected to the LNS. 2) SenseCAP Mate APP In the SenseCAP Mate App, “Online status” indicates “Online” when the gateway is connected to the network and can receive and transfer sensor data. Please refer to the next chapter 2 for obtaining the SenseCAP App. -
Page 10: Bind The Gateway Via Sensecap Mate App
SenseCAP 2. Bind the gateway via SenseCAP Mate App 2.1 Download the SenseCAP Mate APP on App Store SenseCAP Mate APP for iOS on the Google Play Store SenseCAP Mate APP for Android You can also download App from App Center ... -
Page 11: Log In To The App
SenseCAP 2.2 Log in to the APP if it is your first time to use the SenseCAP platform, please register an account first. 2.3 Bind the gateway to the APP Click the + in the upper right corner and select Add device... - Page 12 SenseCAP Set up your device name and location. After successful binding, you will see your device in the Device directory.
-
Page 13: Set Up The Sensecap Sensors Via Sensecap Mate App
SenseCAP 3. Set up the SenseCAP Sensors via SenseCAP Mate APP 3.1 Power on the sensor Power on the sensor and press the button to enter the configuration mode 3.2 Select your device type... -
Page 14: Select The Frequency Plan
3.3 Select the frequency plan Click on "Settings", set the sensor frequency according to your gateway frequency. if your gateway is US915, please set your sensor to US915 frequency. For more detailed about SenseCAP sensors, please refer to: SenseCAP Sensors... -
Page 15: Sensecap Portal And Mate App
SenseCAP 4. SenseCAP Portal and Mate APP SenseCAP Mate APP and SenseCAP Portal can be used to check your device status and device management. on App Store SenseCAP Mate APP for iOS on the Google Play Store SenseCAP Mate APP for Android ... -
Page 16: Sensor Data
SenseCAP 4.2 Sensor data Check the sensor data on the SenseCAP Portal and SenseCAP Mate APP SenseCAP Portal SenseCAP Mate APP...
Need help?
Do you have a question about the M2 and is the answer not in the manual?
Questions and answers