Leica M8 Frequently Asked Questions Manual page 8

5.6 The automatic white balance does not always function satisfactorily.
Leica knows that the AWB must be improved. In the mean time we have realised that it will not
help to refine the presently employed algorithms. Therefore Leica is presently working on a new set
of algorithms. To implement these into the existing firmware architecture has proven to be more
complicated than initially expected. Extensive testing is still necessary so we cannot say exactly
when the solution will be ready.
5.7 Why is there an option to disable the lens detection when, according to my experience,
it makes no difference?
If uncoded lenses are used with this option active a false code may be "recognised", because with
some lenses, there is a screw in exactly that position in the bayonet flange. This may lead to faulty
results as was the case several times during internal tests.
5.8 How does Leica recommend cleaning the sensor?
All commercially available products specially designed for cleaning DSLR camera sensors can be
used. We recommend systems based on Isopropanol (alcohol). Generally, removing the
contamination with a bellows blower or a specialised pressured-air blower should be attempted
first. In case of doubt, cleaning should be performed by specialists.
Page 8 of 8 / As at September 2007
Leica Camera AG / Oskar-Barnack-Straße 11 / D-35606 Solms / Phone +49 (0) 6442-208-0 / Telefax +49 (0) 6442-208-333 / www.leica-camera.com