Advertisement
Quick Links
Advertisement
Related Manuals for Laser HPS-KBTMIC
Summary of Contents for Laser HPS-KBTMIC
- Page 1 User Manual Wireless LED Headphone HPS-KBTMIC...
- Page 2 Thank you for your purchase! Laser Corporation is 100% Australian owned & operated. To get the most out of your product please read the user manual carefully and keep for future use. For speci c information relating to your product such...
-
Page 3: What's In The Box
WHAT’S IN THE BOX • Headphone • Charging Cable • User Manual... -
Page 4: Specifications
SPECIFICATIONS Operating Distance: 10 Meters Battery Runtime: 3-4 hours Frequency: 20Hz - 20 kHz Speaker Impedance: Sensitivity: 75dB+/-3dB Charge Time: 1-2 Hours... - Page 5 CONTROLS Volume Up Light Control Power Button Mode Volume Down Charging Port Short Press: Next song Long Press: Volume up Turn off/on lights Long Press : On/off Short Press : Play/pause music or reject/answer call Press for 2 seconds: Calls back last known number Press to switch between wireless or wired modes...
- Page 6 CONTROLS Continued... Short press: Previous song Long Press: Volume Down Plug the Micro USB cable into the charging port to charge the headphone 3.5mm audio cable can be plugged into the AUX port for wired use Adjustable microphone...
-
Page 7: Aux Mode
• Turn the headphone on • The headphone will automatically enter pairing mode • Open the bluetooth settings on your device, then search for and select HPS-KBTMIC AUX Mode: • Plug the 3.5mm audio cable directly into the headphone jack... - Page 8 OPERATING INSTRUCTIONS Continued... LED Light: Wireless mode: The blue light is flashing when connecting to a device and will flash slowly after the connection has finished Charging mode: The red light is on while the headphone is charging, and will turn blue once the headphone has reached 100% charge FM Mode: •...
-
Page 9: Troubleshooting
TROUBLE SHOOTING No Power: • Check battery level and charge if required. • Try charging the headphone with a USB wall adapter (like a smart phone charger) instead of a laptop or computer. • A USB wall adapter up to 5V/1A is recommended for charging. - Page 10 TROUBLE SHOOTING • If the Bluetooth name “HPS-KBTMIC” does not appear on the list of available devices, then try refreshing the list or searching again. • Allow up to 1 minute for the device to appear on the Bluetooth list.
- Page 11 Visit our website www.laserco.com.au Check us out at www.youtube.com/lasercoau...