Advertisement
To avoid damaging the device:
•Do not stand in or on the foot spa. Use it only while seated.
•Do not use the Foot Spa Massager machine without the water.
•Never operate the foot spa for longer than 60 minutes. The appliance is not meant to
be used continuously for long periods. Allow the appliance to cool sufficiently before
using it again.
•Do not use any foam-producing bath additives. The appropriate bath additives for
bubble baths are available from specialized dealers.
•Do not fall asleep while using the foot spa.
•Never operate the appliance while you sleep.
OPERATING INSTRUCTIONS:
Setting up
1. Add the water to the tub before plug in
2. Plug in the Foot Massager Spa
3. Let the water heat
4. The massage rollers are manual
5. The machine working time is 30 min.
6. Turn the appliance off by pressing POWER and remove the plug from the electrical
socket after using the device
5
Using the foot spa
1. Now place your feet in the water container.
2. During the water bath you can massage the soles of your feet by moving your feet
forward and backward on the rollers.
After the foot bath
1. Turn the appliance off by pressing POWER and remove the plug from the electrical socket.
2. Carefully empty the water out through the water drainage pipe which is installed on the
back.
3. Then rest for a while.
DEVICE CLEANING:
Warning! Risk of injury!
• Unplug the appliance, before cleaning it.
• Let the appliance cool sufficiently before cleaning it.
• Never immerse the appliance in water or other liquids to clean it.
Warning!
• Do not use any aggressive cleaning liquids or solvents. They could damage the surface.
• Do not use it without water
6
Advertisement
