Summary of Contents for iTechworld SOLAR BLANKET 200W
- Page 1 200W / 300W SOLAR BLANKET KIT User Guide Please read this manual carefullly before you use your new solar blanket...
- Page 2 Warning & Safety Information Do not bend the solar panel cells. While in use, keep your solar blanket & controller in a ventilated area and away from any corrosive liquids. Keep the solar blanket and controller clean at all times, and regularly check connectors to ensure they're free of grit before plugging them in.
-
Page 3: Technical Information
Technical Information Model: 300W Cell Type: Monocrystalline Solar Cell Lamination: ETFE Raptor Skin Canvas Material: 600D Ballistic Nylon Power Tolerance %: ± 5% Max Power Output (W): 300W Max Power Voltage (V): 18.8V Max Power Current (A): Open Circuit Voltage (V): 22.44V Short Circuit Current (A): 17.2A... - Page 4 Technical Information Model: 200W Cell Type: Monocrystalline Solar Cell Lamination: ETFE Raptor Skin Canvas Material: 600D Ballistic Nylon Power Tolerance %: ± 5% Max Power Output (W): 200W Max Power Voltage (V): 18.8V Max Power Current (A): 10.64A Open Circuit Voltage (V): 22.44V Short Circuit Current (A): 12.05A...
- Page 5 Dimensions 200W Solar Blanket 300W Solar Blanket...
-
Page 6: Included In The Kit
Included In The Kit Solar Blanket: 1x Solar Controller: 1x 5M Extension Lead: 1x Battery Clamps: 1x... -
Page 7: How To Use
How To Use Connecting Steps Extend the solar blanket (1). Fold out the built-in stand. Point the solar cells towards the sun at the optimum angle. Connect the battery clamps (4) onto your battery. Connect the solar controller (2) to your battery using the Anderson plug on the opposite end of the battery clamps (4). -
Page 8: Folding Steps
Folding Steps... -
Page 9: What Does This Warranty Cover
WARRANTY WHAT DOES THIS WARRANTY COVER? Under normal usage conditions, this warranty covers: Any defect in design or manufacture which results in the product failing to perform substantially as described in authorized advertising or literature. We will either repair or replace the product at our discretion providing that the fault is found to have been caused by a design or manufacturing defect and not misuse or tampering. - Page 10 For more information, please visit our website or E-mail: www.itechworld.com.au service@itechworld.com.au 291 Great Eastern Highway Burswood, West Australia 6100...