Use (See Fig. A); Led Light (See Fig. B) - Parkside PAA 20-Li B2 Original Instructions Manual

Use (see fig. A)
♦ Slide the battery adapter
It clicks into place audibly.
LED light (see fig. B)
NOTE
► With the LED light you can e.g. B. illuminate small dark areas
so that you have an additional light source. The LED light may
only be used as supplementary lighting.
Switching on
♦ Press the ON/OFF switch
The control LED
♦ Press the On/Off switch a second time to turn on the LED light
The control LED
activated during this time.
Switching off
♦ Press the ON/OFF switch
The control LED
PAA 20-Li B2
onto a charged battery
to activate the battery adapter
flashes four times and then lights up.
only lights up for a short time and can only be
again.
goes out after a short time.
.
GB │ CY │
5
.
.
■