Advertisement
Quick Links
WEDICO
®
qÉÅÜåáÅ~ä=Ç~í~W=
Truck tractor:
Length ...............................................458 mm
Width .................................................190 mm
Height................................................226 mm
Track (tread) front..............................140 mm
Track (tread) rear...............................116 mm
Weight with motor drive and NiCads..... 3.5 kg
Superstructure:
Components of die cast aluminium
and aluminium sheet,
stainless steel threaded connectors
and bending wire components,
high impact plastic components.
Cab tiltable. The roof -together with the
top device of the rear panel- is detachable.
Model is prepared for R/C-installation.
B-80-01
B-80-02
`çãéäÉíÉ=háí=
jÉêÅÉÇÉë==
^`qolp
aêáîáåÖ=ãçÇÉä== ` =
Art.-No. 80 white
Art.-No. 81 blue
Art.-No. 82 yellow
Technical data
Drive
Motor: WEDICO-Bühler electric motor, rated voltage
12 volts, 7-segment collector. Idling speed 6000 rpm.
Torque 5 Ncm (approx. 500 pcm) at 4000 rpm.
Power drawn under load at max. torque approx. 3 A.
Idling power consumption with connected gearing
and one differential approx. 0.5 A.
Gearbox
Standard single speed 2-stage spur gearbox with
self-lubricating gearwheels. Reinforced housing.
Gear ratio 5.6 : 1.
Stainless steel drive shafts with ball joints between
Power
gearbox and differential. Differential gear.
transmission
Gear ratio 2 : 1.
Superstructure Frame made of aluminium section, 2 mm thick; tor-
sion resistant.
Rear bumper made of section 2 mm thick.
3-part (rear) to 4-part (front) stainless steel leaf
spring packages on all axles.
Soft rubber tires with reproduction of original tread
pattern.
Fastening components made of stainless steel. All
body parts are made from aluminium sheet and
aluminium die cast 1.5 to 2 mm thick.
Finish
Extremely hard epoxy powder coating. Excellent
base when repainting for special purposes.
Assembly
During assembly it is advisable following the se-
quence given by these instructions. Observe the
notes explaining the various steps in assembly and
use only those parts which are provided; this will
insure a correct result of assembly.
WEDICO system kits are known for their exact fit.
We are glad that you have decided on one of the precious WEDICO
truck models! For the manufacture of individual parts WEDICO uses
durable materials of high quality - rarely to find in these days. This
guarantees durability and enjoyment of your model for years to come.
If you should ever require replacement parts, please get in touch
with your dealer or directly with WEDICO. For order purpose it is
important using not only those EDP-numbers mentioned within the
general parts list (see last page of this instruction) but also indicating
the necessary details concerning colour, quantity and exact term of the
spares required. You may be assured that WEDICO will supply the
replacement part as quick as possible.
© 2001 by WEDICO, P.O. Box 20 04 18, D - 42 204 Wuppertal, Germany.
We can assume no liability for technical or typographical errors.
We reserve the right to incorporate technical modifications.
Duplication and reproduction only with our express consent
.
80
-e.DOC / K-Actros
29.01.2004
=
Page 1
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for WEDICO Mercedes ACTROS Driving model C
Summary of Contents for WEDICO Mercedes ACTROS Driving model C
- Page 1 You may be assured that WEDICO will supply the replacement part as quick as possible. © 2001 by WEDICO, P.O. Box 20 04 18, D - 42 204 Wuppertal, Germany. We can assume no liability for technical or typographical errors.
- Page 2 Screws and other small parts at 1:1 ill. 1 M2 x 8 `çãéäÉíÉ=háí==^`qolp= M4 x 25 Stop nut M3 Part no. 115 Part no. 18 `çãéäÉíáçå=çÑ=~ëëÉãÄäó=Öêçìéë Part no. 908 M2 x 6 Square nut M3 Part no. 114 M4 x 8 Part no.
- Page 3 Assembly of the hinge parts ill. 3a `çãéäÉíÉ=háí==^`qolp= `çãéäÉíáçå=çÑ=~ëëÉãÄäó=Öêçìéë mêÉãçìåíáåÖ=íÜÉ=Çççêë The following text describes the assembly of the left door only; the attachment of the right-hand door has to be done accordingly. 3.1 Assembly of the hinge parts (ill. 3a) Drawings in the upper line show the assembly of the right-hand side, those in the lower line the assembly of the left-hand side.
- Page 4 Cutting threads ill. 4.1 Antenna socket and horns ill. 4.2 `çãéäÉíÉ=háí==^`qolp= `çãéäÉíáçå=çÑ=~ëëÉãÄäó=Öêçìéë ^ëëÉãÄäáåÖ=íÜÉ=êççÑ=ëÉÅíáçå= 4.1 Cutting threads Threads have to be cut into six screw holes on the roof. Before you start the proper assembly, use self-cutting screws 111 supplied with this kit to cut these threads.
- Page 5 Fixing the air filter ill. 4.4 Connecting diagram for the clamp-type terminals ill. 4.5 `çãéäÉíÉ=háí==^`qolp= Antenna receiver 1002 `çãéäÉíáçå=çÑ=~ëëÉãÄäó=Öêçìéë Loudspeaker connection 1003 to the engine sound Space for the attachment of the loudspeaker Connection of roof lamps of Art.-No. 193 from switch panel 1001 4.4 Fixing the air filter...
- Page 6 Assembling the cab ill. 7 hçãéäÉííJ_~ìë~íò=^Åíêçë= `çãéäÉíÉ=háí==^`qolp= Qty. Assembly part Qty. Assembly part cÉêíáÖëíÉääìåÖ=ÇÉê=_~ìÖêìééÉå `çãéäÉíáçå=çÑ=~ëëÉãÄäó=Öêçìéë --- Nut M3 1018 Side panel, -rh- 1 Screw M3 x 6 ACTROS 1019 Windscreen ACTROS 12 Square nut M3 15 Serrated washer A 3.2 1020 Fixing plate for front, -lh- 109 Nut M2 1021 Fixing plate for front, -rh-...
- Page 7 View from below showing the location of components mounted onto the frame ill. 8 `çãéäÉíÉ=háí==^`qolp= Front PCB Steering servo Ribbon cable Exhaust unit Rear axle Rear PCB `çãéäÉíáçå=çÑ=~ëëÉãÄäó=Öêçìéë Components attached to the front frame section ill. 9 mêÉîáÉï=çÑ=íÜÉ== ÉäÉÅíêáÅ~ä=ëóëíÉã=áåëí~ää~íáçå= The illustration at the left shows the locations of the PCBs and the routing of the ribbon cable beneath the frame.
- Page 8 Components attached to the rear frame section ill. 10 `çãéäÉíÉ=háí==^`qolp= Qty. Assembly part Qty. Assembly part `çãéäÉíáçå=çÑ=~ëëÉãÄäó=Öêçìéë --- Nut M3 73 Shaft for fifthwheel 1 Screw M3 x 6 74 Draw spring 2 Screw M3 x 8 341 Blinker lens high, orange 21 Tapping screw 2.2 x 4.5 342 Lens/rear light high, red 25 Retaining washer 3.2...
- Page 9 Rear axle section ill. 12 `çãéäÉíÉ=háí==^`qolp= `çãéäÉíáçå=çÑ=~ëëÉãÄäó=Öêçìéë oÉ~ê=~ñäÉ=ëÉÅíáçå= 12.1 Mounting the mud guards The mud guard support 715 is marked with an "X" and will later be mounted on the passenger’s side, the mud guard support 716 marked "O" on the driver's side. First attach to these supports the mud flaps 717 and the mud guards 714 with four screws 114 and nuts 109 each.
- Page 10 Drive section ill. 13 `çãéäÉíÉ=háí==^`qolp= Qty. Assembly part Qty. Assembly part `çãéäÉíáçå=çÑ=~ëëÉãÄäó=Öêçìéë --- Nut M3 391 Shim 5 x 10 x 1 2 Screw M3 x 8 654 Nut M1.6 6 Screw M3 x 25 656 Socket wrench 3.2 / 2.5 13 Washer 3.2 708 Bühler motor including 1039...
- Page 11 Mounting the switch panel into the cab ill. 14 `çãéäÉíÉ=háí==^`qolp= Qty. Assembly part Qty. Assembly part `çãéäÉíáçå=çÑ=~ëëÉãÄäó=Öêçìéë 210 Knurled nut M5 630 Insulating disc, black 560 Knurled nut M6 701 Jack bush 3.5mm to 7-pole socket 629 Insulating disc, red terminal for roof jçìåíáåÖ=íÜÉ=ëïáíÅÜ=é~åÉä=áåíç=íÜÉ=Å~Ä= The jacks 701 attached to the switch panel are clipped into the...
- Page 12 Final assembly ill. 16 `çãéäÉíÉ=háí==^`qolp= Qty. No. Assembly part Qty. No. Assembly part `çãéäÉíáçå=çÑ=~ëëÉãÄäó=Öêçìéë 1 Screw M3 x 6 729 Socket, bucket seat 228 Windscreen wiper -lh- 731 U-bow, bucket seat 228 Windscreen wiper -rh- 1014 Decal sheet ACTROS 573 Mirror black 1032 Front handle ACTROS 574 Reflector foil 1033 Mirror support -lh-...
- Page 13 Wiring diagram of the electrical equipment ill. 17 `çãéäÉíÉ=háí==^`qolp= Control LED (not incl. in the kit) `çãéäÉíáçå=çÑ=~ëëÉãÄäó=Öêçìéë Supplied with the kit: No. Assembly part brown/red/orange 568 Antenna socket 708 Drive motor Motor 929 Clamp-type connector qÜÉ=ÉäÉÅíêáÅ~ä=ëóëíÉã= 1000 7-pole pin terminal yellow yellow 1001 7-pole socket terminal...
- Page 14 LED starts blinking again. will go on. If the light switch is on, the headlamps, the roof lamps and dard chassis) being offered within our programme WEDICO System- Warning: Ensure that the banana plugs for the charging cable do This signifies that the programming procedure of the speed controller the tail lamps will light.
- Page 15 `çãéäÉíÉ=háí==^`qolp= `çãéäÉíáçå=çÑ=~ëëÉãÄäó=Öêçìéë Complete list of parts necessary for the assembly (please use EDP-number when ordering spare parts) Qty. Assembly part EDP-No. Qty. Assembly part EDP-No. Qty. Assembly part EDP-No. Qty. Assembly part EDP-No. =dÉåÉê~ä=é~êíë=äáëí= --- Nut M3 ..............20040 176 Coil spring for lever........ 20260 929 Clamp-type connector, 3-pole ........
Need help?
Do you have a question about the Mercedes ACTROS Driving model C and is the answer not in the manual?
Questions and answers