Advertisement
Quick Links
From the team that brought you MAGLOCK®, the magnetic helmet connection for
forced-air systems. Introducing FLUIDLOGIC™, the world's first, fully programmable,
high-tech and hassle-free hydration systems for motorsports applications.
With more than 3 years of testing and development, FLUIDLOGIC™ has been proven in
the toughest motorsports events in the world. From the Baja 1000, to the Brickyard of
Indy, our product development team has worked tirelessly to provide a system that has
proven itself to keep drivers hydrated at speed in the heat of battle.
On-road, off-road, open-wheel, recreational and more! No matter if you're a professional
or an amateur driver you will enjoy the ease of use that FLUIDLOGIC™ offers.
• HASSLE FREE HYDRATION AT SPEED
Steering wheel mounted button allows you to hydrate at anytime,
anywhere while doing battle.
• HYDRATION DELIVERED EFFORTLESSLY TO YOUR LIPS
No more reaching for a hose and sucking to get the fluid flowing. Those
days are over. Touch the button and fluid flows freely immediately and
effortlessly.
• FULLY PROGRAMMABLE TO HOW YOU LIKE TO DRINK
Program how much fluid is delivered with a single press, and how o en the
system reminds you to drink and at what strength the dose is delivered.
DESIGNED IN CALIFORNIA / PATENT FLUIDLOGIC COM/PATENTS • RAINMAKER SOLUTIONS INC EL SEGUNDO CA
FLUIDLOGIC COM AND THE CIRCUMFERENTIAL BANDS AROUND THE FLUIDLOGIC COM QUICK CONNECTS ARE
TRADEMARKS OF RAINMAKER SOLUTIONS INC
With the simple touch of the microbutton FLUIDLOGIC™ delivers fresh fluid, to
the users lips, with programmed doses, at the desired strength. An LED light on the
Microbutton can be programmed by the user to flash at a predetermined time to
reminder the user to hydrate.
Magnetic connections, utilizing MAGLOCK® technology, allow Drivers to quickly and
safely attach hydration to their Helmets for Forced-air or open-wheel applications. In
the case of a, "Hot Extract", when every second counts, drivers and safety personnel
can easily remove our system for the driver to exit the vehicle as quickly and safely as
possible. The fear of further injury is virtually eliminated.
The future of hydration is here with FLUIDLOGIC™ in your vehicle. Welcome to the
Hydration Nation!
• EXPANDABLE CONTROL OF THE SYSTEM
Manage multiple FLUIDLOGIC™ Systems and customize user profiles
inside the FLUIDLOGIC™ App.
• PACE THE RACE AND FINISH STRONG
Program the system to deliver hydration on schedule, not over-drink and
ensure you have fluid throughout the race.
• FASTER AND EASIER RECOVERY
Consistent hydration is less taxing on the body. Our research shows that
small frequent doses, hydrates more effectively. Keeping the body from
overdosing and taxing the system. Recovery is more efficient and faster
overall.
• MADE IN USA • FLUIDLOGIC COM
Advertisement
Summary of Contents for RainMaker FLUIDLOGIC
- Page 1 Microbutton can be programmed by the user to flash at a predetermined time to reminder the user to hydrate. With more than 3 years of testing and development, FLUIDLOGIC™ has been proven in the toughest motorsports events in the world. From the Baja 1000, to the Brickyard of Magnetic connections, utilizing MAGLOCK®...
- Page 2 • Always ensure products are secure during disassembly and installation. • Always insulate and protect all exposed wiring and electrical connections. DESIGNED IN CALIFORNIA / PATENT FLUIDLOGIC COM/PATENTS • RAINMAKER SOLUTIONS INC EL SEGUNDO CA FLUIDLOGIC COM AND THE CIRCUMFERENTIAL BANDS AROUND THE FLUIDLOGIC COM QUICK CONNECTS ARE TRADEMARKS OF RAINMAKER SOLUTIONS INC •...
-
Page 3: Inventory List
INVENTORY LIST THE POD MICROBUTTON CABLE MALE CPC CONNECTOR 12 VOLT CABLE ROLL BAR HOSE CLAMP FLUID LINE W/CPC CONNECTORS POD TO DASH CABLE ROLL BAR MOUNT MICROBUTTON ZIP TIES... -
Page 4: Tools Needed
TOOLS NEEDED 5/16” 3MM ALLEN WRENCH HOSE CUTTER 5/16” SOCKET ZIP TIES HEAT GUN... - Page 5 FluidLogic does threaded inserts so that it can be mounted to a The water flows from the “F” of FluidLogic™ logo not include a container with the kit as each plate or bulkhead in the vehicle.
- Page 6 Using a 5/16” socket or driver, tighten the Hose Locate the 1/4” Fluid Line. Disconnect the CPC Connectors and take note Clamp around the bar and securely mount the of the male and female connectors and unwind Pod inside the vehicle. the Fluid Line.
- Page 7 Assure the measurements are correct and cut Take the supplied loose male CPC Connector Slide the supplied Heat Shrink over the cut end the Fluid Line. Keep the remaining section and prepare to connect it to the fluid reservoir. of the Fluid Line. of Fluid Line for use later in the installation.
- Page 8 Locate the 12 Volt Cable. Take the installed Gray Deutsch Connector and Make sure that when you insert the Gray Deutsch insert it into the rear inlet side of the Pod. Connector you hear a secure, “Click” to assure that the part is inserted correctly. Secure the 12 Volt Cable to the vehicle and run it Run the 12 Volt Cable to the power source in the Locate the Pod to Dash Cable.
- Page 9 Align the arrow of the connector with the Pod Route the Pod to Dash Cable through the vehicle, Take the Pod to Dash Cable and mount the dash and carefully connect the two. Once installed working towards the dash, within the vicinity of end directly to a secure area on or behind the correctly, the connector will “Click”...
- Page 10 NEXT STEP INSTALLATION INSTRUCTIONS –OR– INSTALLATION INSTRUCTIONS Power the vehicle/Pod and open the FluidLogic™ Once paired, adjust the parameters and test the app to pair the device with your phone. You pump by pressing the Microbutton. No fluid is should be within a reasonable distance in order to needed to test the system.
-
Page 11: Installation Instructions
INSTALLATION INSTRUCTIONS... - Page 12 INVENTORY LIST 4MM WATER LINE AQUACOM PRO DUST CAP COAXIAL MAGLOCK 6MM FLUID LINE AQUACOM BAJA DOCK...
- Page 13 TOOLS NEEDED 3MM ALLEN WRENCH WIRE STRIPPERS SHARP KNIFE HOSE CUTTER HEAT GUN ZIP TIES...
- Page 14 Once the Pod is completely installed, locate the The Hub will be installed onto the forced air hose Using a sharp knife, pierce the hose making a Hub. that attaches to the helmet. Find a clear section clean cut in a 360 degree fashion. Expose the of the hose that is accessible to the user.
- Page 15 Locate the 6mm Hub Line. Run the 6mm Hub Line through the open end of Feed the 6MM Hub Line so that it runs through the hose that goes to the user’s helmet. the entire Hose and exposes itself to the helmet end and has a few inches of extra Hub Line.
- Page 16 Locate the remaining piece of 1/4” Fluid Line that Take the male end of the CPC Connector and Mark the Fluid Line, leaving a bit of extra Line so was provided from the Pod installation. plug it into the output side of the Pod and run the that it doesn’t bind or kink.
- Page 17 Install the Elbow back into the Hub. Locate the Hose Side of the Coaxial Maglock®. Moving to the end of the Forced-Air Hose, prepare to install the Hose Side Coaxial Maglock®. Take the Air Hose, now with the Fluid Line Insert the 6mm Fluid Line into the Legris until it Bring the Air Hose to the Hose Side Coaxial stops.
- Page 18 Locate the Maglock® Dock. Magnetically attach the Dock to the Hose Side Remove the double-stick tape and mount the Maglock®. Before exposing the adhesive tape on Dock in the desired location, usually on the roof. the back of the dock, sit in the vehicle, find a suitable The adhesive will adhere quickly but allow up to location to mount the Dock assuring that it doesn’t 24hrs for it to completely bond.
- Page 19 Here is an example of the finished installation. Locate the 4mm AquaCom Line. Run the 4mm AquaCom Line into the AquaCom’s Grey Legris. Run the 4mm AquaCom Line through the interior Have the 4mm AquaCom Line exit through the Locate the Helmet Side of the Coaxial Maglock®. of the helmet making sure not to kink the line.
- Page 20 Test the connection of the Helmet Side and Hose Power the vehicle/Pod. The user should purse Use the FluidLogic™ app to adjust to the users Side Coaxial Maglock®. Place the helmet onto the their lips and prepare for fl uid to fl ow. Depress specifi...
- Page 21 INSTALLATION INSTRUCTIONS...
- Page 22 INVENTORY LIST FLUSH 360 HELMET SIDE 4MM HUB LINE MALE CPC CONNECTOR FLUSH 360 HOSE SIDE AQUACOM BAJA 6MM WATER LINE AQUACOM PRO...
- Page 23 TOOLS NEEDED HOSE CUTTER ZIP TIES...
- Page 24 Locate the FluidLogic™ Helmet Side Flush 360 Make sure that the location is free and clear of Clean and prep the location on the helmet. and Hose. any obstructions and will not interfere with any Remove the 3M VHB backing and apply with firm, safety devices, such as head and neck mounts, even pressure.
- Page 25 Pod. It will be towards the helmet. In this instance, using zip ties, the side with the “C” of “FluidLogic™” on it. be sure not to over tighten them as over-tightening may inhibit fluid flow.
- Page 26 Place the helmet in the seat location and assure Use the FluidLogic™ app to adjust to the user’s Place the helmet onto the user and test fit the that the line allows for free movement. Move the specifications.
- Page 27 INSTALLATION INSTRUCTIONS USER INSTRUCTIONS...
- Page 28 DOWNLOAD THE FLUIDLOGIC APP. This is a basic instruction on what You can customize your systems Once done, you’ll be ready to go! Allow access to the App so the QR steps need to take place in order to name, add a photo and register Code can be read by the camera.
- Page 29 Scan the QR Code on the Pod If inputting the code manually, use Allow a few seconds for the Pod to Register your FluidLogic™ system. or underside of the Pod’s Box the 12 digit code located directly connect to the App.
- Page 30 IMPORTANT READ ALL INSTRUCTIONS CAREFULLY BEFORE USAGE. FAILURE TO DO SO MAY CAUSE PERSONAL INJURY OR DAMAGE TO PRODUCT AND/OR PROPERTY. Once paired, name the Pod to The user can take or upload a photo Manual Mode: Manual allows the user to The selection of Semi-Auto introduces associate which driver or vehicle to customize the user profile.
- Page 31 IMPORTANT READ ALL INSTRUCTIONS CAREFULLY BEFORE USAGE. FAILURE TO DO SO MAY CAUSE PERSONAL INJURY OR DAMAGE TO PRODUCT AND/OR PROPERTY. The user can control both the Idle LED The Presets selector sits above the Press apply to sync your device A check mark will be displayed once Brightness to match in-cabin lighting Mode buttons.
-
Page 32: Maintaining The System
WARRANTY Rainmaker Solutions Inc. warranties this product to be free from or attempted by anyone other than Rainmaker Solutions, Inc. and its defects in material or workmanship for a period of two (2) years Authorized Service Representatives. A defective product, meeting... -
Page 33: Troubleshooting
flow for fluid in the lines. If necessary, re-route the the output side of the Pod. The le side as you face it, closest to the line to avoid future issues. “F”. Note that water flows from the “F” of FluidLogic logo toward ™... - Page 35 DESIGNED IN CALIFORNIA / PATENT FLUIDLOGIC COM/PATENTS RAINMAKER SOLUTIONS INC EL SEGUNDO CA FLUIDLOGIC COM AND THE CIRCUMFERENTIAL BANDS AROUND THE FLUIDLOGIC COM QUICK CONNECTS ARE TRADEMARKS OF RAINMAKER SOLUTIONS INC MADE IN USA • FLUIDLOGIC COM...
- Page 36 DESIGNED IN CALIFORNIA / PATENT FLUIDLOGIC COM/PATENTS RAINMAKER SOLUTIONS INC EL SEGUNDO CA FLUIDLOGIC COM AND THE CIRCUMFERENTIAL BANDS AROUND THE FLUIDLOGIC COM QUICK CONNECTS ARE TRADEMARKS OF RAINMAKER SOLUTIONS INC MADE IN USA • FLUIDLOGIC COM...