Advertisement
5.Specifications
Model:KB1
Dimension:280x117x20mm
Weight:540g±20g
Material:Aviation aluminum alloy panel
Colour:Premium Black
Switch:Kailh red low profile switches
The angle of inclination:2°
Thickness:Aluminum alloy panel 13.2mm/Rear:8.2mm
With switches:front 16mm,rear 19mm
Battery capability:1800mAh lithium polymer battery
Connectivity:Bluetooth&Wired
System:Windows/Android/MacOS/IOS
F&Q
6.
Q1: How come the keyboard is not working?
A: Wired connection: Check if the switch is in wired mode and then connect to USB-A to
USB-C cable.
Bluetooth connection: check if the switch is set to Bluetooth mode, then start the bluetooth
pairing.
Q2: How come the keyboard backlight is not on?
A: Please check if you have adjusted the brightness level to the darkest, press Fn + F6 to turn
up the brightness level.
Q3: How long does it take to charge for the first time and for the subsequent charging?A:
The first charge takes 4-6 hours, then 3-4 hours for subsequent charge.
Q4: How come the power indicator doesn't turn to green after a full charge?
A: When the keyboard is fully charged, the indicator light turns green and will automatically
go out after 1 minute. You will only see the green light if you re-enter the wired mode or
Bluetooth mode, you will see the red light turns to green within 3 minutes.
Q5: How come it shows 'disconneted' when I try to connect to the second device?
A: When Bluetooth is connected,the keyboard can only be used under one device. When
connected to a second device, the first device is disconnected, to switch back, simply press-
ing Fn +
/
/
Q6: How come I can't use native language (such as the UK)?
A: The default setting is in American English,you can change the setting on your computer
from American English to UK English. The keyboard layout is the same and so as the corre-
sponding key for the 26 letters.
Q7: Can I program the keys?
A: This function is not available.
Safety Precautions
7.
1. Reduce dust and moisture intrusion.
2. Use keycap puller and twist 90 degrees to pull the key straight up. Prevent unnecessary
lateral force to avoid damage the internal spring.
3. Please use the keyboard in a dry environment.
4. Do not use the keyboard in high temperature, high humidity, strong static magnetic field,
it may cause damage and bring a safety hazard.
5. Do not smash, hit or drop the keyboard as it will damage the internal circuit.
6. Do not disassemble or throw the keyboard into the fire.
7. Do not disassemble or repair the keyboard if you are not authorized personnel.
8. Keep this device away from children, It contains small accessories part, which might be
swallowed by children.
8.FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment. This equipment has been tested
and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning
the equipment off and on,the user is encouraged to try to correct the interference by one
or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired
operation.
The device has been evaluated to meet general RF exposure requirement.
.
Advertisement
