Videosec THY369 User Manual

THY369 Thermostatic Radiator Valve User Manual
Search for " Tuya Smart " Download the
Wifi App with the following icon.
APP need connect to gateway,then connect to device

Technical Data

Power: 3*2 AA* 1.5V alkaline batteries
Working temperature:：-10~60°C
Default range of temperature adjustment：5~35°C
Range of temperature display:：0~70°C
Insulating condition: Normal environment
Running program: Set per 1 week as a cycle
After the actuator stroke detection is
completed, long press the key combination

" " and " " Activate WIFI
distribution network
flashing
Maximum current：90mA
Display accuracy:：0.5℃
Probe sensor:：NTC(10k)1%
Thread size：M30*1.5
Size(mm)：66*52*82+20mm
Maximum route：4.5mm

Initial Setting

Bozsák Tamás
First time open
thermostat, it
displays all icons for
3s then program
version NO.
! Adjustment Error（If solved errors, restart by pressing
Er1 Short route: the pin was stuck which is away from terminus 2mm
Er5 The temperature sensor is disconnected or damaged
Low battery, icon of battery is blinking
After put batteries inside,
icon is
Home Screen
manual mode auto mode
holiday mode Open Widow Detection

Quick Operation

Icon Description
1 Press to switch auto mode, manual mode and holiday mode.
2 Long press 3s to access programmable mode
1 Decreasing Key
2 Long press to close valve 【OFF】
blinking. Press Test One. "ADA"
displays. Press
to
Press , to change
set minutes, hour, week.
value. Press to
batteries, gear reducer and
confirm.
valve is fine, as shown in
picture
）
is on display then mean okay ,if flashing ,then breakdown.
child lock energy saving mode
Test Two. Finished
. If
comfort mode