About Osmo Action 3 Osmo Action 3 supports use while recording at up to 4K/120fps, providing a stable and immersive first-person perspective. It adopts a new generation of intelligent stabilization algorithm, which can effectively eliminate camera shake in all directions. The camera is designed with two touchscreens.
Consult the content below for details. Unboxing · Osmo Action 3 Standard Combo · Osmo Action 3 Adventure Combo · Osmo Action 3 Standard Combo In the Box · Osmo Action 3 Adventure Combo In the Box...
App Download Download DJI Mimo App before connecting you device to a mobile phone. Click here download and install DJI Mimo. Click this link (DJI Mimo Phone Compatibility List) for a list of the compatible operating systems and mobile phones for DJI Mimo. Powering on or off Your Device Press the Quick Switch (QS) Button at the left side of the camera to power on or off the device.
1. Enable Bluetooth and Wi-Fi on your mobile device, and power on Osmo Action 3. 2. Launch DJI Mimo. When it prompts to connect the device, tap "Connect". 3. The phone will automatically pair with Osmo Action 3 via Bluetooth, tap "Pair" to connect your camera to the device.
Activating Your Device Go through the steps above to connect your camera to a phone before first use, and activate it according to the prompts in DJI Mimo. Watch this video for the more details. Check the activation details of your device via the Activation Info page.
Firmware Update Osmo Action 3 only supports updating firmware via the DJI Mimo app. If new firmware is available, you will be notified by DJI Mimo. Update the firmware according to the on-screen instructions. Watch this video for the more details.
Action 3 is compatible with DJI Mic. Consult the steps below to connect your device to DJI Mic. 1. Connect the receiver of DJI Mic to the USB-C port on Osmo Action 3 using a Type-C cable. 2. Link the receiver and transmitter of DJI Mic.
Press the Quick Switch Button five times to disable scuba diving mode. * In the event of scuba diving at depths over 16 m, it is recommended to equip your Action 3 with the waterproof case. In this case, there is no need to enable scuba diving mode.
Follow the steps below to charge Osmo Action 3. It is recommended to charge using DJI 30W USB-C Charger (not included). 1. Charge the camera via the USB-C port. Action 3 supports PPS and PD fast charge protocols, and supports up to 23W fast charge.
Why is my Action 3 overheating during charging or shooting? Osmo Action 3 can shoot 4K/120fps videos at a bitrate of up to 130 Mbps, and the actual video file generated in one minute can be as large as 900 MB. With its compact and portable design, Action 3 inevitably dissipates heat when processing such a large amount of data in a short period of time, which is an irresistible physical law.
When using the 1.5m Extension Rod during skiing, the DJI Mimo app unlocks the power of your smartphone to get the most out of Action 3. It uses cloud computing and AI algorithms to eliminate the selfie stick for skiing and snowboarding scenarios, giving you breathtaking footage that looks like it was shot by a pro.
Page 15
DJI Care Refresh is a comprehensive and reliable protection plan that provides your device with coverage for a range of accidental damages and natural wear. There are two DJI Care Refresh options available for you, 1-Year Plan and 2-Year Plan. By selecting the 2-Year Plan, the official warranty of main parts can be extended to 24 months.