Table of Contents
Advertisement
Quick Links
The Guardsman Garage Alarm System Installation Instructions
Thank you for purchasing from Image4 Security. We pride ourselves on our customer service so if
you have any issues or questions, please call us on 01384 442 646 or email at
customerservice@image4security.com
The Guardsman Alarm System:
Installation onto Guardsman:
1. Position the Guardsman alarm system template transfer underneath the locking hole
so that the half crescent cups the tube locking hole. Ensure the transfer is central to
the box upright.
2. Centre punch the two marked drill holes on the template transfer.
3. Using the ø3.8mm drill bit provided drill through the two centre pop marks.
4. Remove transfer and clean the locking post.
5. Remove the alarm hub cover plate – M4 dome head screws. Top and bottom.
6. Using the two self-tapping screws, press firmly and screw into the two pilot holes to
attach the alarm hub base plate to the upright. Ensure the vibration sensor Is closest
to the locking post.
7. Remove the hub cover using the supplied star Allen key in order to set up and
program the hub (more instructions below).
8. Insert SIM card by sliding the holder right to unlock. (SIM holder above batteries,
below keypad) Follow written instructions attached to register SIM.
9. Insert 3 batteries into the hub. If inserted correctly, you will hear a beep and a blue
light will illuminate.
10. Follow written instructions below to program the hub using the learn button and
keypad.
11. Re-attach the hub cover using the supplied star Allen key.
Guardsman Alarm System – Installation Instructions
Thank You for choosing Image4 Security!
Scan this QR code with your smartphone
to watch the installation video.
Page 1 of 8
Advertisement
Table of Contents
Summary of Contents for IMAGE 4SECURITY Guardsman
- Page 1 Scan this QR code with your smartphone to watch the installation video. Installation onto Guardsman: 1. Position the Guardsman alarm system template transfer underneath the locking hole so that the half crescent cups the tube locking hole. Ensure the transfer is central to the box upright.
- Page 2 12. Secure the cover of the hub using the supplied 2 x M4 dome head 16LG screws. One top and one at the base. Page 2 of 8 Guardsman Alarm System – Installation Instructions...
-
Page 3: Sim Card Installation
2. Batteries: The Alarm uses 3 x AA Batteries which will be fitted inside the Battery Compartment, the Negative side of the Battery is fitted against the springs. Page 3 of 8 Guardsman Alarm System – Installation Instructions... -
Page 4: Programming The Phone Numbers
Please Note: It may be necessary to use the County Code with some SIM Cards. Examples: Let’s assume your number is 01234567890 and you want it to be the first number the Alarm Calls: Page 4 of 8 Guardsman Alarm System – Installation Instructions... - Page 5 Alarm by holding the learn button inside the Alarm whilst 7) Battery Cover (Slide inserting the last battery, 3 beeps will be heard, this Down) indicates the Remote Control has been deleted successfully. Page 5 of 8 Guardsman Alarm System – Installation Instructions...
-
Page 6: Operation
• #9# (this can turn ON or OFF the SMS Function, if this is OFF the Alarm would be able to Call Key-holders Only. • #0# (weekly status report ON or OFF) see below: • #369# (full reset). Please allow a few seconds to complete. Page 6 of 8 Guardsman Alarm System – Installation Instructions... -
Page 7: Disarming The Alarm
** PLEASE NOTE THAT IT MAY TAKE UP TO 1 MINUTE TO RECEIVE A CALL, DEPENDING ON THE NETWORK ** Once the Alarm is triggered it will call up to three designated telephone numbers. Page 7 of 8 Guardsman Alarm System – Installation Instructions... -
Page 8: Specification
When 1 telephone numbers are entered, it will receive 3 calls and 1 SMS. 8. Specification: Wireless Frequency: 868 Mhz. GSM Frequency: Battery Life: Approximately 6 months (using Lithium Batteries). Size: 163 x 82 x 40 mm. Colour: Black. IP Rating: IP66. Page 8 of 8 Guardsman Alarm System – Installation Instructions...