Do you have a question about the WL3DSTOVE21 and is the answer not in the manual?
Questions and answers
Lisa Bolton
January 26, 2025
How do the legs attach
1 comments:
Mr. Anderson
February 10, 2025
To attach the legs to the Warm-Living WL3DSTOVE21, align each leg with the mounting bracket and press up firmly until it clicks into place. For a more secure attachment, you can insert a screw into the pre-drilled hole on each leg.
This answer is automatically generated
Flor Luna
May 28, 2025
Como puedo replasar el foco? No quiere tirar aire caliente pero no se como abrirlo para replasar los focos. Y donde puedo comprar los rellanos. Gracias
Summary of Contents for Warm-Living WL3DSTOVE21
Page 1
® KMS, Inc., All Rights Reserved. Customer number: WL3DSTOVE21 UNIT LEGS ARE LOCATED UNDERNEATH THE UNIT ONCE LIFTED OUT OF THE PACKAGING YOU MUST ACTIVATE YOUR PRODUCT WITHIN 30 DAYS OF PURCHASE Purchase Date ____________Serial Number (...
Page 3
PACKAGE CONTENTS PART DESCRIPTION QUANTITY Infrared Heater Remote Control Control Panel (preassembled to Infrared Heater (A)) Temperature Sensor (preassembled to Infrared Heater (A)) Unit Legs (*assembly required, see pg8) INFRARED TECHNOLOGY...
SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate, or install the product . IMPORTANT SAFETY INSTRUCTIONS WARNING: POTENTIAL ELECTRICAL HAZARD IF NOT ADHERED TO . When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: •...
Page 5
SAFETY INFORMATION Child Lock Safety Feature Press and hold the flame button on the remote control (B) for 5 seconds . Locking is confirmed when a buzzer rings . When locked, the control panel and remote control (if provided) will not function .
FREQUENTLY ASKED QUESTIONS Please review these frequently asked questions on the next few pages prior to using your heater . Q. My heater emits a strange odor when I first open the box and when I turn the heater on for the first time.
Page 7
FREQUENTLY ASKED QUESTIONS Q. The temperature on my heater does not match the temperature display on my wall, or external thermostat. Why? A. This is completely normal . The temperature display on your heater may vary from the temperature display on another thermostat (like the one mounted to your wall or a purchased external thermostat) . This is because the temperature sensor on the heater reads the temperature directly around the heater .
PREPARATION Place the heater on a firm, level surface and plug into a grounded 120 V, 60 Hz power outlet and turn on the unit . Only operate heater in upright position . Insert two AAA batteries into the remote control before using (batteries not included) . *(Not all products will include a remote control .) Please note that infrared heaters do not heat like a traditional space heater .
TROUBLESHOOTING PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION The heater 1 . The power cord is not plugged in . 1 . Plug the power cord into an electrical does not turn outlet . on . 2 . The electricity at the main fuse 2 .
CONTROL PANEL Timer Indicator Light Indicates when OFF Timer is set Flame Effect Indicator Light Indicates when Flame Effect is on Indicates when unit is recieving power from the wall Power Indicator Light outlet. INFR ARED TECHNOLOG...
REMOTE CONTROL PART NAME DESCRIPTION Temp Up Button Increases the set temperature value Heater Mode Button Toggles between the two heat modes available Temp Down Button Decreases the set temperature value Power Button Powers the heater on or off Short Press Toggles the Flame Effect ON / OFF and between the varied flame effect brightnesses.
OPERATING INSTRUCTIONS 1 . Turn the heater on or off by pressing the Pow- er button on the control panel (C) or by press- ing the Power button on the remote control (B) . Once the power is off, heating elements will stop working first .
Page 13
OPERATING INSTRUCTIONS 4. To set the timer to power off the heater, start the unit and press the Timer button on the control panel (C) or remote control (B). Note: The timer-power-off function can only be set when the heater is in power-on mode.
CARE AND MAINTENANCE WARNING: Before performing any maintenance task, turn off the power, unplug the unit, and allow it to cool completely . To keep the heater clean, clean the outer shell with a soft, damp cloth . Use a mild detergent if necessary .
ONE-YEAR LIMITED WARRANTY The manufacturer warrants this heater against defects in materials and workmanship on functional parts, for a period of 1 year from the original date of purchase . Your sales receipt showing the date of purchase of the product is your proof of purchase . Keep it in a safe place for future reference . This warranty is subject to personal use only, commercial or rental applications will not be covered .
Remote Control 2 .01 .01 .650 Blower Fan 1 .04 .04 .4 .271 YOU MUST ACTIVATE YOUR PRODUCT WITHIN 30 DAYS OF PURCHASE web: http://kmswichita.com/customer-service/register-a-product.html Printed in China Warm-Living is a registered trademark of ® KMS, Inc., All Rights Reserved.
Need help?
Do you have a question about the WL3DSTOVE21 and is the answer not in the manual?
Questions and answers
How do the legs attach
To attach the legs to the Warm-Living WL3DSTOVE21, align each leg with the mounting bracket and press up firmly until it clicks into place. For a more secure attachment, you can insert a screw into the pre-drilled hole on each leg.
This answer is automatically generated
Como puedo replasar el foco? No quiere tirar aire caliente pero no se como abrirlo para replasar los focos. Y donde puedo comprar los rellanos. Gracias