Troubleshooting - La Crosse Technology WS-8011UM-TWC Instruction Manual

TROUBLESHOOTING

Problem: The LCD is faint.
Solution: Replace the batteries.
Problem: "OFL" appears in the indoor temperature LCD.
Solution: 1) Move unit to an area with warmer or cooler surrounding
2) Current surrounding temperatures are outside measuring
Problem: No reception of WWVB signal.
1) It may help reception to face the front of the temperature
Solution:
2) Wait overnight for signal.
3) Be sure the temperature clock is at least 6 feet from any
4) Remove batteries for five minutes, reinsert and leave the unit
5) If problems persist contact La Crosse Technology.
Problem: Hour is incorrect (minute and date are correct).
Solution: Be sure correct time zone and daylight saving time are selected.
Problem: "--.-" appears in outdoor temperature LCD
Solution: 1) Check batteries in the remote temperature sensor.
If batteries are replaced in remote temperature sensor the
temperature clock must be re-started.
Remove all batteries, and then follow start up procedure.
Problem: "OFL" appears in the outdoor temperature LCD
1) Remote temperature is out of range.
Solution:
2) Check batteries.
3) Interference from an outside source (cordless telephone, etc.)
4) Contact La Crosse Technology.
Note: For any questions not answered, contact La Crosse Technology with the contact
information found at the end of this instructional manual.
temperature.
range.
clock in the general direction of Ft. Collins, Colorado.
electrical devices, i.e. TV sets, computers, or other radio
controlled clocks.
alone overnight without pressing buttons.
15