IMPORTANT SAFEGUARDS Safety precautions should always be followed when using electrical appliances. These precautions include the following: READ ALL INSTRUCTIONS PRIOR TO USING YOUR POPCORN MACHINE. Before operating the popcorn machine, always make sure it is located on a flat and level surface. Do not place the unit on or near a hot gas or electric burner or in a heated oven.
Page 3
INSTRUCTIONS Thank you for purchasing the vintage style popcorn machine, which uses the latest technological advances in kettle popcorn operation. Model No. & Specifications: Model No.:81200 & 81201 Voltage: AC 120V~60Hz Input Power: 850W Please read this Instruction Manual carefully before assembling and using the popcorn machine.
Page 4
FOR TABLETOP WITH CART MODELS ONLY: A. Main unit x 1 pc B. Kettle x 1 pc C. Working platform x 1 pc D. Hand rail x 1 pc E. Square pole x 2 pcs F. Long stand x 1 set G.
Page 5
CART MODELS (81210 & 81211) ASSEMBLING PROCEDURES: 1. Use bolts & washers (Package B) provided to connect the Long stand (F) and the 2 pcs square pole (E) together. 2. Connect the completed above (1) with the short stand (G) by the bolts & washers (Package B).
Page 6
USING YOUR POPCORN MACHINE Make sure the popcorn maker is unplugged before you do any of the following. Before using the unit, please check carefully if voltage is suitable to the country. (Please check if the voltage is matching with rating label specified next to the power cord). Clean the internal surface of the kettle and main unit surfaces.
14) Keep heater switch (III) OFF if the unit is not continuously running. Keep only the spot light and warmer ON to keep the popcorn warm, dry and tasty. 15) Serve your popcorn with popcorn scoop provided. 16) Remove plug from power supply if the unit is not being used for a long time. Repeat steps 7 to 10 for continue popping.
Need help?
Do you have a question about the 8OZ and is the answer not in the manual?
Questions and answers