Summary of Contents for Racing RACPOT220
- Page 1 ORIGINAL INTRUCTIONS Sander User manual RACPOT220 READ INSTRUCTION MANUAL BEFORE USE THE PRODUCT RACING 32, rue Aristide Bergès - ZI 31270 Cugnaux - France Fabriqué en RPC 2018...
- Page 2 DESCRIPTION Features 1. ON/OFF switch (I/O) 2. Sanding plate 3. Dust collector 4. Power plug 5. Sanding paper 6. Triangle sanding paper 7. Triangle sanding plate 8. Finger sanding plate...
- Page 3 General information Use and storage of the instruction manual This instruction manual contains important information and must be read carefully before use. Keep the manual in a safe place and if you pass this product on to any other person, be sure to give that person this instruction manual.
- Page 4 General safety instructions WARNING Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.
- Page 5 e) Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
- Page 6 Protect yourself from the dangers that occur when sanding by wearing a dust mask and protective goggles. Always connect the dust extractor to the machine during operation. Do not work on material containing asbestos. When sanding metal be aware that the sparks produced can pose a risk of fire. Because of the risk of fire, inflammable materials must be removed from the spark flight zone and / or working area.
- Page 7 Mains voltage Ensure that the local mains voltage is in conformity with the information on the rating label. The machine is designed for use with single phase alternating current 230 V˜ / 50 Hz and is double-insulated. Make certain that the rated voltage stated on the machine’s type plate matches the local mains voltage before using the machine.
- Page 8 Fitting sanding sheets Before, check the sanding plate and remove any debris on it if any. Stick the sanding paper on the sanding plate. The sanding paper must fit the surface of the sanding plate and may not overlap. The holes in the sanding paper must line up with the holes in the sanding plate in order for the dust extraction to function properly.
- Page 9 Caution: Wear safety goggles, ear protection and a dust mask when using the machine. Always keep a firm grip on the tool. Use both hands. Keep your fingers away from the sanding plate/attachment. Switch the machine ON and wait until the machine has reached its full no load speed before engaging with the workpiece.
- Page 10 Changing / emptying the collection bag Remove the dust collector from the machine as described above. Remove the black cover (C) from the dust collector. Empty the dust collector and clean using compressed air. The dust collector can also be washed but must be dried thoroughly before being re-used.
-
Page 11: Maintenance And Cleaning
Maintenance and cleaning Care Clean the machine each time you use it. Pay particular attention to the area around the ventilation slots and ensure that these are free of wood dust to prevent the risk of the motor overheating. For this reason we recommend that you clean the multi sander with compressed air each time you use it. - Page 12 The tool being well-maintained and in good condition Whether the tool is used according to the scope of use as stated in this manual. Warning: It is necessary to identify measures to protect the operator that are based on an estimation of exposure in the actual conditions of use (taking into account of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle in addition to the trigger time.)
- Page 13 ZI, 32, rue Aristide Bergès – 31270 Cugnaux - France Tel: +33 (0)5.34.502.502 Fax: +33 (0)5.34.502.503 States that the designated below machine: SANDER Model: RACPOT220 Serial number:20180749660-20180752159 Developed, designed and manufactured in accordance with the requirements of directives: Machinery Directive 2006/42/EC...