Do you have a question about the KT-X1 and is the answer not in the manual?
Questions and answers
Mauro Bandini
April 20, 2025
My WK-G1 kettle jump suddenly from 24 degrées to 123 degrées without warm up
2 comments:
MAURO BANDINI
April 20, 2025
@Mauro Bandini
Mr. Anderson
May 10, 2025
A sudden jump in temperature reading from 24°F to 123°F without actual warming could indicate a malfunction in the temperature sensor or internal electronics. It may also result from a damaged or faulty component such as a broken control board or wiring issue. If the kettle is malfunctioning, it should not be used, and Customer Support should be contacted.
This answer is automatically generated
Allison Du Val
May 3, 2025
What does it mean when the temperature keeps fluctuating after it’s reached the temperature you set it to? Sometimes we set it to 201 and then it reaches 201 and it goes back-and-forth from 190 to 215 back-and-forth and back-and-forth…
1 comments:
Mr. Anderson
May 17, 2025
When the WILLSENCE KT-X1 temperature fluctuates between 190°F and 215°F after reaching the set temperature of 201°F, it indicates that the kettle is operating in Keep Warm mode. In this mode, the kettle maintains the set temperature by cycling the heater on and off, causing slight fluctuations around the target temperature.
Page 1
TEA MAKER AND KETTLE Reith Center, Century Holiday Plaza, USER MANUAL Shahe Street, Nanshan District, KT - X1 Shenzhen, Guangdong, China Email: service@willsence.com Questions or Concerns? www.willsence.com Please contact us at: service@willsence.com Always be the first to know Made in China Follow www.willsence.com...
Page 2
KT-X1 ELECTRIC KETTLE AND TEA MAKER BY WILLSENCE. If you have any questions or concerns regarding your new product, please reach out us at service@willsence.com We hope you enjoy your new product! REGISTER WILLSENCE VIP Register VIP to get free 6 months extended warranty, Please visit www.willsence.com/register...
TABLE OF CONTENTS SPECIFICATIONS Product name Tea maker and kettle Specifications .............. 1 Model KT-X1 Package Contents ............1 Jug capacity 1.7L Power 1200W Important Safety Information ........2 Voltage 120V 60Hz Use & Care ..............3 Jug material High borosilicate glass Net weight 3.53lbs (1.6kg)
IMPORTANT SAFETY INFORMATION Use & Care • IMPORTANT: Please read, understand, and comply with all of the The ideal environment for using this product is at elevations instructions provided in this manual before using the device. lower than 2000m.If using this product at elevations higher Failure to comply with the instructions given in this manual or than 2000m, the capacity of water used should not exceed 1.5L.
KNOW YOUR WILLSENCE KETTLE OPERATING YOUR WILLSENCE KETTLE Water Test CAUTION! ! Do not remove the glass kettle from the package if it is broken. Contact Customer Support immediately to replace your kettle (see page 14). Tea Infuser lid Perform the Water Test before using your kettle to make sure it’s working properly.
Page 6
OPERATION OF YOUR KETTLE 4. Infusing tea The correct brew time is depending on the type of tea and your personal preference. Enjoy your cup of tea and let it brew as 1. Remove tea infuser lid,fill with fresh water(enough for the you like.
Page 7
NOTE: TEA STEEPING CHART Sleep Mode Type Temperature Steep Time If the unit is not in use for 5 minutes, it will revert to sleep mode. The heater and all lights will be o , but your last selections will remain Green Tea 175°F 2-3 min...
Page 8
2. A er selecting the temperature , Press START CANCEL button to activate the KEEP WARM function. Example: If the preset temperature is 185°F, the process is as following: 1. Plug in and turn on the kettle. 2.Press 185 button, and then press START CANCEL Note: NOTE: In the process of heating or heat preservation, you can press...
WARRANTY You should descale the kettle at least once a week if you use it Willsence provides a two-year product warranty from the date of frequently. Descaling removes any mineral deposits that have built up purchase for all our products.
CUSTOMER SUPPORT Join Willsence VIP Community Any issues or questions regarding your new product , please feel free to contact our Customer Support Team. Facebook Customer Support facebook.com/Willsencecommunity Email : service@willsence.com *Please have your order invoice or order number Instagram ready before contacting Customer Support instagram.com/willsence/...
Need help?
Do you have a question about the KT-X1 and is the answer not in the manual?
Questions and answers
My WK-G1 kettle jump suddenly from 24 degrées to 123 degrées without warm up
@Mauro Bandini
A sudden jump in temperature reading from 24°F to 123°F without actual warming could indicate a malfunction in the temperature sensor or internal electronics. It may also result from a damaged or faulty component such as a broken control board or wiring issue. If the kettle is malfunctioning, it should not be used, and Customer Support should be contacted.
This answer is automatically generated
What does it mean when the temperature keeps fluctuating after it’s reached the temperature you set it to? Sometimes we set it to 201 and then it reaches 201 and it goes back-and-forth from 190 to 215 back-and-forth and back-and-forth…
When the WILLSENCE KT-X1 temperature fluctuates between 190°F and 215°F after reaching the set temperature of 201°F, it indicates that the kettle is operating in Keep Warm mode. In this mode, the kettle maintains the set temperature by cycling the heater on and off, causing slight fluctuations around the target temperature.
This answer is automatically generated