Keydous NJ80-AP User Manual

Tips:
1.WIFI signal interferes with Bluetooth signal to some
extent, so bluetooth receiver cannot be too close to WIFI
signal source.
2. It is not necessary to insert and remove the shaft body
with great force. When you find that the shaft body needs
great force, it may be misaligned, please stop the operation,
otherwise the hot plug base will be damaged, or the solder
pad will fall off and the PCB will be directly discarded.
Matters needing attention:
· Lithium battery is built into the product. It is strictly
forbidden to place the product in high temperature, high
pressure and direct sunlight. If not used for a long time,
please store the keyboard in a cool and dry environment,
and turn off the power switch.
· The original charging cable must be used to connect the
USB port of the computer for charging, and the charging
current should be less than 1A.
Product: Zhuhai Qiannuo Technology Co., LTD
Website: www.keydous.com
Email address: keydous@keydous.com
Keydous
NJ80-AP
User's manual
Start a New Journey in 2022