Advertisement
Quick Links
HAND SANITIZER DISPENSER STATION
A S S E M B LY
I N S T R U C T I O N S
MODEL NUMBERS:
MKC-HSS-P-2020-WB-003
MKC-HSS-P-2020-BL-004
MKC-HSS-P-2020-RR-002
MKC-HSS-P-2020-WB-001
Thank you for choosing SANITAME!
PLEASE READ BEFORE RETURNING THIS PRODUCT FOR ANY
REASON.
If you have question or experience a problem with your SANITAME Hand
Sanitizer Station purchase, go to sanitame.com
If you can't find the answer or do not have access to the Internet, call
800-999-4521 from 10:30am to 6:30pm, EST Mon-Fri to speak with an agent.
Please have the model number available when you call.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
COMMERCIAL GRADE
FOOT PEDAL OPERATED
Advertisement
Summary of Contents for Sanitame MKC-HSS-P-2020-WB-003
- Page 1 PLEASE READ BEFORE RETURNING THIS PRODUCT FOR ANY REASON. If you have question or experience a problem with your SANITAME Hand Sanitizer Station purchase, go to sanitame.com If you can’t find the answer or do not have access to the Internet, call 800-999-4521 from 10:30am to 6:30pm, EST Mon-Fri to speak with an agent.
-
Page 2: Assembly And Setup
ASSEMBLY & SET UP IMPORTANT: THE UNIT COMES 3 DIFFERENT HOLDER TYPES TO ACCOMODATE: - 1 LITER 32OZ. CONTAINERS - HALF GALLON CONTAINERS - ONE GALLON CONTAINERS PLEASE USE THE CORRECT ACTUATOR TAB AND CONTAINER HOLDERS FOR YOUR PREFERRED CONTAINER CHOICE Page 2... - Page 3 ASSEMBLY & SET UP DIAGRAM (FRONT VIEW) 32 OZ. - 1 LITER BOTTLE USAGE DESCRIPTION Base Legs Actuator Rod 1 Liter Container (not included) 1 Liter Container Holder (Bottom) 1 Liter Container Holder (Top) DESCRIPTION Station Body Back Cover M8x20mm Screws Foot Pedal Short Actuator TAB Page 3...
- Page 4 ASSEMBLY & SET UP DIAGRAM (FRONT VIEW) HALF GALLON BOTTLE USAGE DESCRIPTION Base Legs 1/2 Gallon Container (not included) 1/2 Gallon Container Holder (Bottom) 1/2 Galllon Container Holder (Top) Station Body DESCRIPTION Back Cover M8x20mm Screws Foot Pedal Long Actuator TAB Page 4...
- Page 5 ASSEMBLY & SET UP DIAGRAM (FRONT VIEW) 1 GALLON BOTTLE USAGE DESCRIPTION 1 Gallon Container Holder (Bottom) Actuator Rod Base Legs 1 Gallon Container (not included) Station Body Back Cover DESCRIPTION M8x20mm Screws Foot Pedal 1 Gallon Container Holder (Top) Long Actuator TAB Page 5...
-
Page 6: Diagram (Rear View)
ASSEMBLY & SET UP DIAGRAM (REAR VIEW) DESCRIPTION Base Legs Station Body 1/2 Gallon Container Holder (Bottom) 1/2 Galllon Container Holder (Top) Actuator Rod M5 Screws M6x45mm Screws M6 Nuts M8x20mm Screws Foot Pedal Page 6... - Page 7 ASSEMBLY & SET UP DIAGRAM (DETAIL VIEW) Pedal Assembly & Actuator Tab DESCRIPTION Actuator Rod M8x20mm Screws M6x45mm Screws Base Legs Foot Pedal Actuator Tab Page 7...
- Page 8 ASSEMBLY & SET UP STEP 1 - OPENING THE BODY & PREPARATION 1- Remove the screw on the back cover to expose parts. (See Fig 2) 2- Open the back cover of the body, and remove the components. (See Fig 3) 3- Lay down all parts on a flat surface.
-
Page 9: Step 2 - Installation Of Legs
ASSEMBLY & SET UP STEP 2 - INSTALLATION OF LEGS 1- Locate and prepare two legs, 4 screws and 4 nuts, and the main body of the unit. (See Fig 1) 2- Insert the screws to the legs. (See Fig 2) 3- Insert the legs to the holes on the sides of the body. - Page 10 ASSEMBLY & SET UP STEP 3 - INSTALLATION THE PEDAL 1- Insert the pedal (13) mechanism into the body from the groove. (See Fig 2) 2- Insert the long screw and nut into the first hole of the pedal and install. (See Fig 3) IMPORTANT: DO NOT OVERTIGHTEN THE SCREW AS THE...
- Page 11 ASSEMBLY & SET UP STEP 4 - INSTALLATION THE ACTUATOR TAB 1- Select desired pump actuator tab for your use: -LONG Actuator tab version is designed for Half Gallon & 1 Gallon Containers. -SHORT Actuator tab version is designed for 1 Liter - 32 oz. Containers. (See Fig 1) 2- Insert the long screw and nut into the first hole of the actuator tab and install.
- Page 12 ASSEMBLY & SET UP STEP 5 - INSTALLATION ACTUATOR ROD 1- Place the Actuator Rod as shown on picture (See Fig 1) 2- Insert the long screws and nuts into the first holes of the rod, connecting the Pedal Assembly and Actuator Rod (See Fig 1) 3- Install the screw and nut.
- Page 13 ASSEMBLY & SET UP STEP 6- INSTALLATION CONTAINER HOLDERS There are 3 sets of container holders Each set consists of 2 components. - 1 Liter - 32 OZ version. - Half Gallon version. - One Gallon version. 1- Select desired holders. (See Fig 2) 2- Insert the top and bottom assembly into slots of the desired height.
- Page 14 ASSEMBLY & SET UP STEP 7 - PLACEMENT OF CONTAINER BOTTLE 1 - Place a full sanitizer bottlle into the holder. -For 1 Liter 32oz. Bottles you can just place them in the holder. -Hallf Gallon & One Gallon Bottles require the holder to be secured between neck of the bottle and the pump nozzle.
- Page 15 ASSEMBLY & SET UP STEP 8- INSTALLATION OF BACK COVER 1- Insert the back the back cover in the same way you removed before in- stallation, and slide down on the slots. Make sure the teeth of the slot tabs look down.
- Page 16 PRODUCT VISUALS HAND SANITIZER DISPENSER STATION with 1 liter/32oz. Holders & Container Page 16...
- Page 17 PRODUCT VISUALS HAND SANITIZER DISPENSER STATION with 1 Gallon. Holders & Container Page 17...
- Page 18 PRODUCT VISUALS HAND SANITIZER DISPENSER STATION with 1/2 Gallon. Holders & Container Page 18...
-
Page 19: Troubleshooting & Warranty
D) Make sure the screws holding the pedal, actuator tab. and actuator rod are not overtighten, and mechanism can move easy, and freely. IF NONE OF THE ABOVE SOLVES THE PROBLEM, CONTACT SANITAME BY support@sanitame.com WE REPLY AND RETURN ALL SUPPORT INQUIRIES WITHIN 48 HOURS DURING WEEKDAYS. - Page 20 “For a clean and healthier environment” SANITAME logos and product names and the color scheme are trademarks of MK Creatives Limited Liability Company. All rights reserved. Product in this box may differ slightly from that pictures. Does not affect function.