Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Lumintrek TrailBlazer TB-3000
- Page 1 Lumintrek TrailBlazer LED Bicycle Light User Manual Model: TB-3000...
- Page 2 It is advised to always keep a backup light and battery pack with you whenever you go on an extended ride. Please note that your Lumintrek light is very bright, never aim it directly at any oncoming motorists/cyclists.
- Page 3 3. Handle Bar Mounting Insert the O-ring into the hook on the front of the light head. You must stretch the O-ring slightly which makes it thinner and then it slips into place easily. Place the light head on the handlebars and stretch the O-ring around the bottom of the handle bar.
- Page 4 Push and hold the switch button for two seconds (from off) to enter into the STROBE mode. 6. Battery Level Indicator The Lumintrek TB-3000 Trailblazer comes with a 4 stage power meter. As the battery depletes, the backlit switch button will change color from Green-Blue -Red-Flashing Red.
- Page 5 Cold temperature Keep the battery warm Defective charger Replace the charger Flicker Cables not secured Make sure all parts are firmly connected 9. Technical Data LED: 3 CREE XML-U2 LED lifespan：above 50,000 hours Max output: 3000 lumens Lens: High transparent acrylic lens Modes: 3-level adjustable brightness, flashing and over-heat protection functions Output levels: Max: 3000 lumens Medium: 1450 lumens Low: 650 lumens Runtime: Max: 3 hours Medium: 6 hours Low : 12 hours...
Need help?
Do you have a question about the TrailBlazer TB-3000 and is the answer not in the manual?
Questions and answers