Summary of Contents for RIDEIWAKE RS33
- Page 1 RS33 RIDING STEWARD USER’ S QUICK GUIDE Please read this User Guide before using the product and keep it for future use.
-
Page 2: Special Note
Please do not use sharp objects to remove the battery. The battery of this product is not removable. If the battery is not replaced properly, it may explode. Please do not replace the battery by yourself. Warranty Service RIDEIWAKE product is guaranteed to have no defects in materials or manufactur-... - Page 3 Within one year from the date of purchase, RIDEIWAKE will repair or replace, at RIDEIWAKE’s options, the failed parts of the device which is under normal use. This warranty does not apply to: (1) Surface damage such as scratches and dents.
- Page 4 When the battery is full, the middle button blue light is lit, RS33 will be OFF and has no response on pressing buttons. Removing the Micro_USB cable and wait for 2 seconds, RS33 will automatically exit the OFF state and can be turned on normally.
- Page 5 RS33 is off. 6. Custom Settings 10:25 6.1, For the first time you turn on RS33, please set up Distance & Speed the unit in metric or imperial according to your usage habits, including three types: speed & mileage,...
- Page 6 Menu setting system User profile Height Weight 6.3, Set your own opening words Users can customize the opening words of your RS33. Operation as below: 10:25 Long press button to enter Menu setting welcome page Pls enter your...
- Page 7 GPS signal icon. This icon appears as a border when RS33 is searching for satellites. When RS33 is positioned, the icon is displayed in orange. If GPS signal is good, 9 compartments are fully displayed. 10:25 Clock.
- Page 8 RS33 will automatically saves the Calorie Kcal previous riding data. 7.5, Restarts a New Ride Access menu and select New Start to start a new ride. The previous ride data will be automatically saved by RS33 and can be viewed in the history.
- Page 9 7.6, LED Brightness Control During Riding During riding, RS33 LED lights can be easily turned on and off. There are dual light sources in RS33 including High Beam and Low Beam, which can be independently controlled and adjusted or made different combined light levels at your wishes.
-
Page 10: Flashlight Mode
Install the remote switch close to RS33, a heart icon will appear on the RS33 screen, indicating that the remote switch and RS33 are connected. With RS33 LED lights on, short press button, the LED Low beam or High beam can be adjusted to different levels independently. - Page 11 Press and hold your finger softly on the window for 15 to 20S (to ensure measurement accuracy, please do not press hard), RS33 screen will indicate the heart rate. You can measure your heart rate while riding.
- Page 12 13. Temperature Regulation RS33 has built-in temperature regulation circuit and professional algorithm, which automatically adjusts the brightness output according to the working state and ambient temperature to ensure the device will not be over heated. 14. Battery Power Indicator Batter Power > 90% Batter Power >...
Need help?
Do you have a question about the RS33 and is the answer not in the manual?
Questions and answers