Intended Use .............................................................................................................................................................2
2.
General Warnings .......................................................................................................................................... 2
3.
Parts list and Specifications ......................................................................................................................... 3
Do you have a question about the Weblazer and is the answer not in the manual?
Questions and answers
Summary of Contents for DEEP EAST SUPPLY Weblazer
Page 1
Extending Rods .................................6 5.2. Retracting Rods .................................6 5.3. Removing Rods .................................6 DEEP EAST SUPPLY, LLC Lufkin, TX 75904 DO NOT DISCARD. Rev: 20201217 Retain a copy of this user manual for reference. Please note all instructions are subject to change without notice.
Page 2
This symbol alerts the user to information which is particularly important. 1.1. INTENDED USE The Weblazer™ is intended to clear spider webs from a trail under casual to moderate riding conditions. They are NOT intended for downhill or other forms of extreme riding conditions.
Page 3
3. PARTS LIST AND SPECIFICATIONS Item QTY Per Kit Weight (g) L / W (mm) 56 /ea [~1540 / ~480] / ~32 Adapter and Rod Section 1. ¼ Turn Fastener 2. Retaining Spring 3. Adapter and Telescopic Rod [Extended/Collapsed] 4. Retainer Ring Fork Mount Section 34 /ea ~76 / ~38...
Page 4
4. INSTALLATION Choose the vertical mounting location on the bicycle front fork where each Fork Mount will attach. Decide orientation of Fork Mounts to achieve as close to a 5° forward shifted angle as possible as shown in Figure 2. Test the fit of different angles by first attaching the rods (See Step 6 below) while adhering to the below installation guidance.
Page 5
One by one, place each Fork Mount on either side of the front fork while making sure they are aligned across the fork as diagramed in Figure 6. Route Cable Ties around the fork and Fork Mount, in each Cable Tie groove displayed in Figure 7, ensuring the Cable Ties route under any electric cables or other accessories.
Page 6
5. OPERATION 5.1. EXTENDING RODS Take hold of the tip and, with control, pull the end out until telescopic rod is fully extended. Grab each section, starting with the second to largest, and pull tight to ensure each part is snug. 5.2.
Need help?
Do you have a question about the Weblazer and is the answer not in the manual?
Questions and answers