Advertisement
To release the MR28 from the mount cradle, first remove the security screw that secures the MR28 to the cradle's
bottom tab. While holding the MR28 with one hand, press the cradle's bottom tab upwards, releasing the MR28 from the
bottom of the cradle. Then remove the MR28 from the cradle's top tab.
Desk or Shelf Mount
The MR28 can be placed on a desk or shelf resting on the non-scratch rubber feet. The mount cradle is not necessary
for a desk or shelf installation.
Secure the MR28
Depending on your mounting environment, you may want to secure the MR28 to its mount location. If the MR28 has
been installed using the mount cradle, it should be secured via security screw (Torx security screws are included).
Power the MR28
If mounting to an electrical junction box, feed the Ethernet cable through the cable access hole in the mount cradle. If
mounting to a wall or ceiling, the Ethernet cable will feed from behind the MR28. The
"Power Source
Options" section of
this document lists the different powering options and their unique characteristics.
11
Advertisement
