Table of Contents
Advertisement
TROUBLESHOOTING
Problem:
The LCD is faint.
Solution:
1) Replace batteries.
Problem:
"OFL" appears in LCD.
Solution:
1) Follow Reset directions. (Total rainfall accumulation has
exceeded 999.99in.)
"---" Appears in LCD (rain monitor has lost signal from gauge)
Problem:
Solution:
1) Follow reset directions.
2) Distance the Rain Monitor or Rainfall Transmitter at least 6 feet
(2m) away from interfering sources on a 433 MHz signal
(computers, TV sets, headphones, speakers, etc.).
3) Move receiver away from metal window frames.
4) Neighbors using 433 MHz devices can interfere also.
Problem:
Need to reset the bar graph (EEPROM Rain Monitor memory)
1) Remove batteries, and follow instructions in section III, under
Solution:
Features & Operations.
Problem:
Rainfall amount is not correct.
Solution:
1) Manually change the rain multiplicator number to 105, following
instructions in section II, under Features & Operations.
Note: For any questions not answered, contact La Crosse Technology with the contact
information found at the end of this instructional manual.
12
- Quick Links:
- Quick Set-Up Guide
Hide quick links:
Advertisement
Table of Contents
