PROAIM CT-SLBD-01 Assembly Manual page 3

•
Remove both the nut bolts of the lock with
the help of an 2.5mm Allen Key, as shown in
the image.
•
Attach the lock to the bottom of the top shelf
of the cart and mark the lock holes.
•
Now make holes in the marking points with
the help of a drilling machine.
•
Insert the bolts by properly matching the
holes of the lock and cart.
•
Then, insert the nuts into the lock bolts and
tighten them with an Allen key.
NOTE: Hold the nut using a Plass
Included) and tighten it using an 2.5mm Allen
Key.
•
The lock is properly attached to the cart.
(Not
3