Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Paugge ENT-SP20B4HBT
- Page 1 Paugge ENT-SP20B4HBT 18Gbps HDMI 1×4 HDBaseT Splitter VER 1.1...
-
Page 2: Table Of Contents
Thank you for purchasing this product For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. Surge protection device recommended This product contains sensitive electrical components that may be damaged by electrical spikes, surges, electric shock, lighting strikes, etc. -
Page 3: Introduction
1. Introduction Paugge 18Gbps HDMI 1x4 HDBaseT Splitter can distribute 1 source signal to any 4 display devices. Support video resolution up to 4K2K@60Hz 4:4:4. It is designed with 1 HDMI loop output and 4 HDBaseT outputs. The HDMI signal transmission distance can be extended up to... -
Page 4: Specifications
4. Specifications Technical HDMI Compliance HDMI 2.0b HDCP Compliance HDCP 2.2/1.x Video Bandwidth 594MHz/18Gbps Video Resolution Up to 4k2k@60Hz 4:4:4 8-bit,10-bit,12-bit(1080p@60Hz) Color Depth 8-bit (4K2K@60Hz YUV4:4:4) 8-bit,10-bit,12-bit(4K2K@60Hz YCbCr 4:2:2/4:2:0) RGB 4:4:4, YCbCr 4:4:4 / 4:2:2 / 4:2:0 Color Space Support HDR, HDR10+, HLG, Dolby vision LPCM 2.0/2.1/5.1/6.1/7.1, Dolby Digital, Dolby TrueHD, Dolby Digital Plus(DD+), DTS-ES, DTS HD Master, HDMI Audio Formats... -
Page 5: Operation Controls And Functions
Mechanical Housing Metal Enclosure Silkscreen Color Black Transmitter: 220mm (W) × 130mm (D) × 40mm (H) Dimensions Receiver: 140mm (W) × 65mm (D) × 18mm (H) Transmitter: 853g Weight Receiver: 246g Input: AC100 - 240V 50/60Hz, Output: DC 24V/2.7A Power Supply (US/EU standards, CE/FCC/UL certified) Power Consumption Operation... - Page 6 Rear Panel AUDIO OUT TX RX RS-232 2 HDBT OUTPUT 3 LOOP OUT EDID HDMI DC 24V 9 10 11 Name Function Description Connect to a PC or control system via a 3-pin phoenix connector cable for three functions: 1, Firmware update; RS-232 2, Control the Splitter via RS-232 commands;...
-
Page 7: Hdbaset Receiver
Data Signal ▪ Illuminating: HDMI signal with HDCP. ▪ Flashing: HDMI signal without HDCP. Indicator lamp ▪ Dark: No HDMI signal. (Orange) Plug the DC 24V power supply into the unit and connect the adaptor to an AC outlet. (Note: The transmitter can DC 24V power the receiver via a CAT cable.) 5.2 HDBaseT Receiver... -
Page 8: Ir Pin Definition
AUDIO OUT Audio output port, connect to amplifer or speaker. Connect to the IR Receiver cable. The IR signal will send IR IN to the IR OUT port of the transmitter. Connect to the IR blaster cable, the IR signal is from IR IR OUT IN port of the transmitter. -
Page 9: Edid Mode
6. EDID Mode The defined EDID setting list of the product is shown as below: EDID Mode EDID Description 11111 1080P, Stereo Audio 2.0 11110 1080P, Dolby/DTS 5.1 11101 1080P, HD Audio 7.1 11100 1080I, Stereo Audio 2.0 11011 1080I, Dolby/DTS 5.1 11010 1080I, HD Audio 7.1 11001... -
Page 10: Ascii Commands
Initialization Finished! FW version x.xx.xx System Setup help! List all commands help! r type! Get device model r type! ENT-SP20B4HBT Get the unit all status: power, r status! Get device current status r status! in/out connection, edid mode MCU BOOT: Vx.xx.xx... - Page 11 Command Code Function Description Example Feedback Default Setting Output Setting Enable hdmi loop out Set hdmi loop output stream stream on/off s hdmi stream z! s hdmi stream 1 ! enable Disable hdmi loop out z=0~1(0:disable,1:enable) stream Enable hdmi loop out Set hdmi loop output hdcp on/ hdcp enable...
- Page 12 Command Code Function Description Example Feedback Default Setting EDID Setting Set input EDID from default EDID z, z=1~27 1, 1080p,Stereo Audio 2.0 2, 1080p,Dolby/DTS 5.1 3, 1080p,HD Audio 7.1 4, 1080i,Stereo Audio 2.0 5, 1080i,Dolby/DTS 5.1 6, 1080i,HD Audio 7.1 7, 3D,Stereo Audio 2.0 8, 3D,Dolby/DTS 5.1 9, 3D,HD Audio 7.1...
- Page 13 Command Code Function Description Example Feedback Default Setting RS-232 BYPASS Setting Set RS-232 port connect to RS-232 connect to HDBT out1 Receiver RS-232 s rs232 bypass s rs232 bypass HDBT OUT1 hdbt y! hdbt 1! RS-232 not connect port, y=0~5( 0=all, to HDBT OUT 1~4= hdbt out 1~4 5=NC) RS-232 connect to...
-
Page 14: Application Example
8. Application Example Amplifier IR Receiver IR Blaster 2.0 Speakers Transmitter AUDI O OUT TX RX RS-232 HDBT OUTPUT LOOP OUT EDID LA N HDMI DC 24V Cat 6/6a/7 Power Supply UHDTV Receiver DVD or Blu-ray Player HDMI OUT AUDIO OUT IR IN IR OUT 2.0 Speakers IR Receiver...