SUPRENT HC315 User Manual

Download this manual

Blade

Charge Display

Guide Comb

Speed Button

Power Button

Cutting Length Switch

Cleaning Brush

USB Cable

Oil

DIGITAL SCREEN FUNCTION DESCRIPTION

Speed Indication

2 speed modes are available: Standard Mode and Turbo Mode

Battery /Charging Reminder

When charging, the corresponding battery indicator flashes.

When the battery power is lower than 20%, the corresponding

indicator flashes.

*Note:When the power is too insufficient to be turned on,

please charge it immediately. If it is not used for a long time,

please fully charge it at least once every six months.

Power Button

Short press the power button to turn it on or off.

Long press the switch to change the gear mode (TURBO).

Charging Methods

This product contains a lithium battery with a capacity of 1400mAh The

charging time is about 2 hours.

After the product is fully charged, the running time is no less than 180 minutes.

Cutting Length Adjustment of Blade

Adjusting the ring to choose the hair length that you

ant to remain ranges are: 0.8/1.1/1.4/1.7/2.0 mm.

Different sizes of combs are available for you to

remain different length of hair, the size includes: 3/6/9/12mm.

Need help?

Do you have a question about the HC315 and is the answer not in the manual?

Page 1 DIGITAL SCREEN FUNCTION DESCRIPTION Speed Indication 2 speed modes are available: Standard Mode and Turbo Mode Battery /Charging Reminder Blade When charging, the corresponding battery indicator flashes. When the battery power is lower than 20%, the corresponding indicator flashes. *Note:When the power is too insufficient to be turned on, please charge it immediately.
Page 2 BASIC PARAMETERS Notes: The first time you cut hair, cut only a small amount of hair until you become accustomed to the length of hair each guide comb provides-Start by attaching the largest guide comb on the clipper. Motor ：Voltage：3.2V -Then use shorter guide combs if a shorter length is desired.
Page 3 Step 4-Top of The Head Short Tapered, Flat Tops and Short Cuts Hairstyle • Using the comb attachment 9mm or 12mm, cut top of head from back to front • Starting with the longest attachment comb (12mm), cut from the back of the against the direction in which the hair normally grows.
Page 4: Warranty And Service
Please turn off the trimmer and restart after it cools down. If the body temperature is abnormally high, please stop using it immediately SUPRENT and cool it down for a while before restarting. If the heat persists, support@suprent.com...
Page 5 HAIR CLIPPER HC315...