Android LCD Specification Introduction 1.1 Introduction STAD150WT-15 Android LCD is a new model Android LCD by STONE Tech. It is equipped with 1.2GHz Quad-core Coretex A7, capacitive touch frame. Recommended power supply is DC 12V, the PCB board integrates a variety of peripheral interfaces.
All rights reserved by STONE Technologies 1.2 Technical Parameters Main Parameters Parameter Description Quad-core 1.2Ghz ARM Cortex™-A7 System Android 4.4.2 Rooted 2pcs 512MB DDR3 eMMC eMMC Mali400MP2 OpenGLES2.0 VG1.1 Display Parameters Parameter Description Single Interface LVDS eight-way Resolution 1024x768 16:9 Ratio...
Page 5
All rights reserved by STONE Technologies 1 programming button,1 Buttons User-defined Power Supply Parameter Typical Unit Operating Voltage 11.5 12.5 Operating Current 1560 Reliability Test Typical Unit Operating Temperature ℃ Storage Temperature ℃ Operating Humidity Structure Size Description External Dimensions 347.30mm*271.30mm*56.2mm...
All rights reserved by STONE Technologies Interface Description 2.1 Serial Ports STAD150WT-15 is integrated with 4 serial ports. UART0, UART1, UART2, UART3 are RS-232 level converted. All have been treated with anti-static treatment. UART2, UART3 are an RS-232 and RS-485 hardware multiplex interface, can be connected to an external RS-485 level device.
USB-DEVICE interface. This interface can only be used for system programming and ADB debugging. 2.4 LED Interface There are two LEDs on the STAD150WT-15.The POWER LED is always on when the display is powered. The USER LED is user defined, which function can be customized by user.
All rights reserved by STONE Technologies 2.7 TF Card Holder The TF card holder supports large-capacity storage. It is designed for hot-swap detection, supports eMMC protocol 4.3 and SD Memory Card protocol v2.0. 2.8 Audio Interface The HPO is the headphone jack, the MIC is the microphone jack, and the SPK is the left channel speaker jack.
2.11 GPS Module (Optional) The STAD150WT-15 is equipped with a GPS-enabled 4G module to support fast and accurate positioning. If you need this function, you need to put the GPS antenna in the open space. When you turn on the Android positioning function, you can get the latitude and longitude coordinates of the device at this time.
All rights reserved by STONE Technologies International Certification CE Certificate FCC Certificate STAD150WT-15 Equipment Manual www.stoneitech.com Release 01/2019...
Page 13
All rights reserved by STONE Technologies Certifica ISO9001:2008 STAD150WT-15 Equipment Manual www.stoneitech.com Release 01/2019...
- Official website: https://www.stoneitech.com/ http://www.stone-hmi.com/ - Alibaba platform: http://shuangying-ocean.en.alibaba.com/ http://stonetech.en.alibaba.com/ - Telephone: 0086-10-84351669 - E-mail: info@stone-hmi.com Other support In need of technical queries, please contact STONE representatives in the subsidiaries and branches responsible for your area. STAD150WT-15 Equipment Manual www.stoneitech.com Release 01/2019...
Need help?
Do you have a question about the STAD150WT-15 and is the answer not in the manual?
Questions and answers