Advertisement
DESCRIPTION
The NXRM radio module allows NX Lighting Controls to communicate wirelessly with wired and other wireless components in the NX system.
SPECIFICATIONS
Classification
Electrical Ratings
Control Connection
Operating Environment
Construction
Mounting
Dimensions
Weight
Color
Patents
Certifications
Warranty
NXRM-H INSTALLATION
The NXRM radio module is a self-contained assembly which includes the RF radio, Bluetooth® radio, control electronics, and antenna. A threaded
stem and lock nut are provided for mounting through a 1.2" aperture and fixture housing. Located on the back of the unit, a pair (2) of miniature
SmartPORT™ connectors are used for connection to an NXFM fixture module or other NX smart components.
1.
Remove the lock nut from the threaded stem of the unit.
2.
Insert the stem through the opening in the housing. See figure 1.
3.
Carefully snug (do not overtighten) the nut against the housing making sure the gasket is pulled up tight against the housing. See figure 2.
4.
Use the appropriate Current manufactured cable to connect the radio module to the NXFM fixture module. The second connector is
provided to allow a series connection with other NX modules.
Class 2 Device/Raintight
Input: 12-24 VDC
Low Voltage SmartPORT™
Operating Temperature: -40°F to 185°F [-40°C to 85°C]
Relative humidity (non-condensing): 0 to 95%, IP65 Rated
Housing: GSM UL Rated 94 HB Plastic
Mounts through 1.2" D hole in fixture housing
2.1"L x 1.5"D Overall (1.4"L x 1.2"D Stem)
53.34mm L x 38.1mm D Overall (35.56mm L x 30.48mm D Stem)
4.0 oz (113.4 g)
White, Black, or Gray
Patent(s) Pending
cULus listed, FCC Part 15.247, Conforms with UL916 and certified to CAN/CSA C22.2
Five-year limited
currentlighting.com/nxlightingcontrols
© 2022 HLI Solutions, Inc. All rights reserved. Information and specifications subject to change
without notice. All values are design or typical values when measured under laboratory conditions.
72-00619 Rev F
Page 2 of 4
Rev 06/11/22
3703B_NXRM-H_Install
Advertisement
