BT Security PL-RLV User Manual

Relay actuator

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

Please read this manual carefully before using this product , keep it safe for future

use. We reserve the right to modify the specification in this manual at any time

without notice.

PL-RLV

2-WIRE

GND NO COM NC

BUS BUS

POWER

User Manual

SYSTEM

12V S2

S1 GND

RISER

PL-RLV

Table of Contents

Need help?

Do you have a question about the PL-RLV and is the answer not in the manual?

Questions and answers

Summary of Contents for BT Security PL-RLV

Page 1 User Manual PL-RLV PL-RLV SYSTEM 2-WIRE GND NO COM NC 12V S2 S1 GND RISER BUS BUS POWER Please read this manual carefully before using this product , keep it safe for future use. We reserve the right to modify the specification in this manual at any time...
Page 2 1. About the PL-RLV Unit The relay actuator PL-RLV is an accessory device designed for 2-wire systems to enable control of door locks . Features as follows: Note that the factory default is lock control mode. Allows to opening of gates, door locks .
Page 3 POWER: LED Indicator, on when connected to live Bus. Bus: Connection for the 2 wire bus line, no polarity. DIP :Used for setting the address of the RLV and configuring work mode. 3. Unit Mounting PL-RLV SY STEM 2-WIRE GND NO COM NC...
Page 4 5. DIP Switch Setting The DIP switch on the rear of the RLV is used t o s et t he a ddress. This setting need according the DIP switch and S2 port to program.Please refer to the following tab for more detailed information regarding the DIP and S2 settings. DIP settings for lock.
Page 5 5.1 Internally powered lock connection - Suitable for Power-on- to-unlock/Fail Safe strikes. PL-RLV controls the a second lock for door station 1 Exit Button E-lock 1# Camera (Device Address:0) GND NO COM NC 12V S2 S1 GND CDV-RLC 2-WIRE SYSTEM...
Page 6 5 .2 External Power Supply powered lock connection If need the external power supply to the lock,the jumper must be taken off before connecting. A: Power-on-to-unlock(fail-secure) lock : PL-RLV controling the second lock of door Adaptor for the lock Exit Button...
Page 7 B: Power-off-to-unlock(fail-safe) lock: PL-RLV controling the second lock of door station 1 External PSU for the lock Exit Button EM-lock 12V S2 S1 GND GND NO COM NC 1# Camera (Device Address:0) PL-RLV SYSTEM 2-WIRE COM NC 12V S2 S1 GND...
Page 8 6. Connecting 2 x PL-RLVs In a single svstem, two PL-RLV units can be connected to control a gate/lock and a light if required Adaptor for the lock E-lock Exit Button Safety Type: power-on to open power-off to lock GND NO COM NC...