BEFORE YOU BEGIN Working with electricity comes with huge risks that should never be taken lightly, safety should always come first. To avoid personal injury, possible damage to equipment or danger of fire, all work on electronic equipment should be conducted following these safety procedures. General Safety Before working on any electronics, consider following these basic safety precautions to help reduce any hazards.
Page 3
Static Damage Prevention Static electricity can damage electronic devices and your system. To avoid damage, keep static-sensitive devices in their static-protective bags until you are ready to install them. To reduce the possibility of electrostatic discharge, observe the following precautions: •...
Page 4
Table of Contents Kit Includes …...................... Theory of Operation …..................Installation and Connection ................
Switch function in the control panel. These Dpad controls can then be used for adding joysticks or 8 specialty buttons in software that supports it. Installation of the plunger requires the Zebsboards V3 (or higher) plunger to be updated to the V4R51 (or higher) firmware for proper operation.