Solenoid Drive - UNI Geräte MG Series Manual

Solenoid drive

Series MG.., MG..A, MG..A..C (no explosion protection)
Series MG..Xn, MG..A..Xn, MG..A..C..Xn (with
for the intended use in zone 2) in accordance with
2014/34/EU (ATEX 95))
Solenoid drive MG 004 – 008
Unscrew hexagonal head screw (900) and remove it including insulating bush (401*). Remove cover
of solenoid housing (105*) from solenoid housing (103). Loosen and remove connecting bolt (501).
Solenoid drive volume control butterfly valve
Loosen protective cap (505) and remove including o-ring (403*). Remove cover of solenoid housing (105*)
from solenoid housing (103). Unscrew and remove hexagonal nut (901).
Pos.
UNI-Geräte E. Mangelmann Elektrotechnische Fabrik GmbH
Holtumsweg 13, D-47652 Weeze, Tel. +49 2837/9134-0, Fax. +49 2837/1444
www.uni-geraete.de info@uni-geraete.de
Seite 4 / 14
- protection
Solenoid drive MG 010 – 020
I
tem Description
103 Solenoid housing
106 Upper part of housing
500 Magnet plate
501 Connecting bolt
701 Cable gland
702 Solenoid
714 Mains outlet
800 Solenoid drive
900 Hexagonal head screw
901 Hexagonal nut
1004 Casting compound
TM 4021 220.100.038-18