Table of Contents
Advertisement
Operation instructions
LOCK function
Press TIME ON and TIME OFF
The
i
con
will
Press TIME ON and TIME OFF buttons together
The
i
con
will
disappeared from
MUTE mode
In this mode, the air conditioner will work with low noise performance.
In this mode, you can start the SLEEP mode at the same time.
Note:
* MUTE button is only available in COOLING, HEATING and FAN ONLY mode.
* Press MODE, FAN SPEED, SMART or SUPER button to cancel MUTE mode.
ECO mode
In this mode, the air conditioner will bring you energy saving performance by lower running currency.
Note:
* ECONOMY button is ineffective in SMART and SUPER mode.
* SMART and SUPER
* Press ON/OFF, MODE, TEMP ±, FAN SPEED, SLEEP, QUIET or ECONOMY
button to cancel ECONOMY mode.
IFEEL function
The temperature sensor built in remote controller is activated.It can sense its surrounding temperature,
and transmit the signal back the unit,the unit can adjust the temperature so as to provide maximum
comfort.
Note:
Advice to put the remote controller in the place where the indoor unit receive signal easily.
Advice to cancel the IFEEL mode so as to save energy when stopping the air conditioner.
CLEAN function
When the air conditioner is in standby, and the mode of remote controller is in Cooling or Dry,
CLEAN
button
to start
Clean mode is ineffective in TURBO mode
Press ON/OFF or MODE button can exit the Clean mode, then the
indicator "
" will disappear.
After the clean process finish, the air conditioner will return to Cooling or Dry as preset,
while the indicator"
LOCK function
buttons together
appears on the
the LCD
the the LCD
ECO mode
buttons are not available in
IFEEL function
LOCK function
Clean mode,then the indicator "
.
" on remote controller will display for about 10 mins.
for 3 seconds
for 3 seconds
Press together
for 3 seconds
MUTE mode
ECONOMY
mode.
" will display on LCD.
7
to start
LOCK function
again to stop LOCK function.
1
PRESS
.
ECO
IFEEL
.
CLEAN
2
PRESS
CLEAN
CLEAN
PRESS
Press
CLEAN
PRESS
Advertisement
Table of Contents
