FAZA 3
PHASE 3
A
Montaža panela
Na unutarnjem dijelu tuš kabine probušite rupe fi 3 mm
bušilicom. Učvrstite pomoću vijaka, prstenova i čepova.
B
Ø 3mm
C
Fitting the panel
On the inside part of the shower cabin, bore the profiles with
3mm Ø drill. Block by using screws, rings and plugs.
Upute za ugradnju
Installation Manual
Vrečica s dijelovima za montažu kabine
Bags with components for the assembly
6x
6x
6x
. VENUS D + D
mod
Važno
Iako je materijal koji se koristi u proizvodnji najbolje
kvalitete, može se oštetiti uporabom određenih
kemikalija, kao što su aceton i razgrađivači općenito.
Tijekom ugradnje, preporučuje se zaštiti proizvod (na
primjer tuš kadu) kartonom.
Tuš kabinu moraju ugraditi za to ovlaštene osobe.
Proizvođač ne odgovara za štetu ili ozljede osoba ili
stvari nastale nepravilnom ugradnjom.
Important notes
Although the material used in the construction of our products is
of the highest quality, they may be damaged by certain chemical
agents such as acetone or solvents in general.
During installation, it is advisable to protect the surfaces of the
product (such as the shower tray) using cardboard.
The shower box must be installed by qualifiedpersonnel.
The manufacturer declines all liability for damage or injury
to person or things caused by incorrect installation.
6x
6x
1x
2 x
Need help?
Do you have a question about the VENUS D+D and is the answer not in the manual?
Questions and answers