Advertisement

WINDMAX Green Energy
WindMax-A4 350W Wind Turbine System
User Manual
Page 1 of 9

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the A4 and is the answer not in the manual?

Questions and answers

Summary of Contents for WINDMAX A4

  • Page 1 WINDMAX Green Energy WindMax-A4 350W Wind Turbine System User Manual Page 1 of 9...
  • Page 2: Packaging Content

    1. Packaging Content Name, Quantity and Function of Each Component Generator 1 set (generate electricity and connect poles) Blades 3 pieces (utilize wind power to drive generator) Flange for blades 1 (connect generator and blades) Nose Cone Controller 1 (convert AC to DC) Other Parts 6 Hexagonal bolts (...
  • Page 3 Ground Nail Poles (diameter: 48mm, length: 2m; not fully displaying) 3 pieces Poles linking slipcover 2. Technical standard and power curve Model: Windmax-A4 Rated power: 350W Maximum power: 500W Rotor diameter: 1.5m Start up wind speed:.2.5m/s Rated wind speed: 13m/s...
  • Page 4: Power Curve

    There are two basic requirements for a good site: high average wind speed and low wind turbulence. The higher the average wind speed, the more the power will WINDMAX wind turbine generate. The power available in the wind goes up with the cube of the wind speed. For example, the power available in the wind of 5mps speed is nearly twice as of 4mps.
  • Page 5: Installation

    4. Installation Please choose a day for installation and wire connection without wind. Step one. Choose space to lay the base and anchor as showed in following map. Page 5 of 9...
  • Page 6 Cautions: ① T he hatch of basement should face to one anchor when place the basement. ② I f the distance is rather far from the batteries, we suggest use much thicker standard cable wires. Step two. Use the bolts and nuts for base to fix base on ground. And the anchor inserted in the earth or fixed on the concrete basement.
  • Page 7: Electrical Wiring

    Step six. Install the board on the tail girdle, then pull out the pivot axis of the generator, make the pivot hole of tail face to the one of generator body, next insert the pivot axis, get the pivot hatch through pivot axis and open it.
  • Page 8 Distance from WINDMAX to < 50 50-100 100-150 battery (meter) Cable Size 2. Electrical wiring of off-grid systems The ground wire from generator must be connected to ground. The anode wire from generator must connect to batteries’ anode and inverter’s anode. The cathode wire from generator must connect to batteries’...
  • Page 9 * The actual wind turbine may be different from pictures shown. Page 9 of 9...

Table of Contents