Advertisement

OMADA
Cutter 9141
Operator's Manual
Read the manual carefully before using it....
GENERAL POWER TOOL SAFETY
WARNINGS
Warning!
Read all safety warnings,
instructions,
specifications provided with this
power
tool.
Failure
instructions listed below may result in
electric shock, fire, and/or serious injury.
Save all warnings and instructions for
future reference. The term "power tool"
in the warnings refers to your mains-
operated (corded) power tool or battery-
operated (cordless) power tool

WORK AREA SAFETY

Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power
illustrations,
and
to
follow
all
www.omadatools.com
tools create sparks which may ignite the
dust or fumes.
Keep children and bystanders away while
operating a power tool. Distractions can
cause you to lose control.

ELECTRICAL SAFETY

Power tool plugs must match the outlet.
Never modify the plug in any way. Do not
use
any
adapted
earthed(grounded) power tools. Modified
plugs
and
un-matching outlets will
increase the risk of electric shock.
Avoid body contact with earthed or
grounded
surfaces,
radiators, ranges and refrigerators. There
is an increased risk of electric shock if your
body is earthed or grounded.
Avoid body contact with earthed or
grounded
surfaces,
radiators, ranges and refrigerators. There
is an increased risk of electric shock if your
body is earthed or grounded.
Do not expose power tools to rain or wet
conditions. Water entering a power tool
will increase the risk of electric shock.
Do not abuse the cord. Never use the cord
for carrying, pulling or unplugging the
power tool. Keep it away from heat, oil,
sharp edges or moving parts.
When operating a power tool outdoors,
use an extension cord suitable for outdoor
use. Use of a cord suitable for outdoor use
reduces the risk of electric shock.

PERSONAL SAFETY

Stay alert, watch what you are doing and
use common sense when operating a
power tool. Do not use a power tool while
you are tired or under the influence of
drugs or alcohol. A moment of inattention
while operating power tools may result in
serious personal injury.
Use
personal
protective
Always wear eye protection. Protective
equipment such as a dust mask, non-skid
safety shoes, hard hat, or hearing
protection used for appropriate conditions
will reduce personal injuries.
Prevent unintentional starting. Ensure the
switch is in the off-position before
plugs
with
such
as
pipes,
such
as
pipes,
equipment.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 9141 and is the answer not in the manual?

Questions and answers

Summary of Contents for Amada 9141

  • Page 1 • Keep children and bystanders away while operating a power tool. Distractions can Cutter 9141 cause you to lose control. ELECTRICAL SAFETY • Power tool plugs must match the outlet.
  • Page 2 connecting to power source and/or PRODUCT OVERVIEW battery pack, picking up or carrying the Warning! The product must be tool. fully assembled before operation! • Remove any adjusting key or wrench Do not use a product that is only before turning the power tool on. A partly assembled or assembled with wrench or a key left attached to a rotating damaged parts! Follow the assembly...

Table of Contents