Table of Contents
Advertisement
2-3
Front Panel LED and Buttons
No.
Name
1.
Reset Button
2.
ID Button
Power button
3.
with LED
System
4.
Status LED
HDD Status
5.
LED
LAN 1/2
6./7.
Active/Link
LEDs
1
3
5
L1
7
Color
Status
--
--
Green
On
Green
Blink
N/A
Off
Green
On
On
Amber
Blink
N/A
Off
On
Green
Blink
Amber
On
Green/
Blink
Amber
N/A
Off
Green
On
Green
Blink
N/A
Off
2
4
L2
6
Description
Press the button to reset the system.
Press the button to activate system identification
Indicates the system is powered on.
System is in ACPI S1 state (sleep mode).
• System is not powered on or in ACPI S5 state (power off)
• System is in ACPI S4 state (hibernate mode)
Indicates system is operating normally.
Indicates a critical condition, may include:
-System fan failure
-System temperature issue
Indicates non-critical condition, may include:
-Redundant power module failure
-Temperature and voltage issue
-Chassis intrusion
Indicates system is not ready, may include:
-POST error
-Processor or terminator is missing
Indicates locating the HDD.
Indicates accessing the HDD.
Indicates HDD error.
Indicates HDD rebuilding.
Indicates no HDD access or no HDD error.
Indicates a link between the system and the network or
no access.
Indicates data trasmission or receiving is occuring.
Indicates no data transmission or receiving is occuring.
- 19 -
System Appearance
Advertisement
Table of Contents
