Table of Contents
Advertisement
22 TROUBLESHOOTING
TROUBLESHOOTING
FAQs
Frequently Asked Questions
Q:
What are the best temperature settings for my freezer?
A:
The default setting for the freezer is -19° Celsius. Adjust these settings as necessary to keep food at
desired temperatures. Ice cream should be firm and ice cubes should not melt in the freezer.
Q:
How do I set the freezer temperatures?
A:
Continually press the Freezer button on the control panel until the desired temperature appears. The
numbers will cycle from highest to lowest and then return to the highest again with continuous
pressing.
Before Calling for Service
Review this section before calling for service; doing so will save you both time and money.
Cooling
Problem
Appliance is not
cooling or has no
power.
Cooling system runs
too much.
A fuse in your home may be blown or the circuit breaker tripped. Or the appliance is
connected to a GFCI (Ground Fault Circuit Interrupter) outlet, and the outlet's circuit
breaker has tripped.
• Check the main electrical box and replace the fuse or reset the circuit breaker. Do not
increase fuse capacity. If the problem is a circuit overload, have it corrected by a qualified
electrician.
• Reset the circuit breaker on the GFCI. If the problem persists, contact an electrician.
The freezer control is set to OFF (some models).
• Turn the control ON. Refer to the Setting the Controls section for proper temperature
settings.
Freezer is in the defrost cycle.
• During the defrost cycle, the temperature of each compartment may rise slightly. Wait 30
minutes and confirm the proper temperature has been restored once the defrost cycle has
completed.
Appliance was recently installed.
• It may take up to 24 hours for each compartment to reach the desired temperature.
Appliance was recently relocated.
• If the appliance was stored for a long period of time or moved on its side, it is necessary
for the freezer to stand upright for 24 hours before connecting it to power.
Appliance is replacing an older model.
• Modern appliances require more operating time but use less energy due to more efficient
technology.
Appliance was recently plugged in or power restored.
• The appliance will take up to 24 hours to cool completely.
Possible Cause & Solution
Advertisement
Table of Contents
