Beats Solo3 Wireless Manual
  1. Manuals
  2. Brands
  3. Beats Manuals
  4. Headphone
  5. Beats Solo3 Wireless
  6. Manual

Beats Solo3 Wireless Manual

Hide thumbs Also See for Solo3 Wireless:
1
2
3

Advertisement

Table of Contents

Set up and use your Solo
headphones
Here's everything you need to know to make the most of your Solo
1.

Turn on

Press and hold the power button for about a second to turn your headphones on or off.
2.

Set up

Follow these steps if you have an iPhone using iOS 10. When you set up your
headphones in this way, they set up automatically with your other devices that are signed
in to iCloud and using iOS 10, macOS Sierra or watchOS 3.
1. Hold your headphones next to your unlocked iPhone.
2. Press the power button on your headphones for 1 second.
3. After a few seconds, your iPhone asks you to connect. If it doesn't, press the power
button on your headphones for 5 seconds.
4. Follow the instructions on your iPhone.
If you have another Bluetooth device, follow these steps to pair your headphones to that
device:
5. Press the power button for 5 seconds. When the fuel gauge flashes, your headphones
are discoverable.
6. Go to Bluetooth settings on your device.
7. Select your headphones from the list of discovered Bluetooth devices.
3.

Connect to a different device

Your headphones automatically reconnect to the last device you used with them. To
connect to a different device, follow these steps.
For iPhone X using iOS 11 or later:
1. Open Control Centre by swiping down from the top-right corner of the screen.
2. The audio card appears. Tap the AirPlay icon in the top-right corner of the card, then
choose your headphones from the list of playback devices.
3
Wireless
3
Wireless headphones.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Solo3 Wireless and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Beats Solo3 Wireless

Summary of Contents for Beats Solo3 Wireless

  • Page 1 Set up and use your Solo Wireless headphones Here's everything you need to know to make the most of your Solo Wireless headphones. Turn on Press and hold the power button for about a second to turn your headphones on or off. Set up Follow these steps if you have an iPhone using iOS 10.
  • Page 2 For iPhone, iPad or iPod touch using iOS 11 or later: 3. Open the control centre by swiping up from the bottom edge of the screen. 4. The audio card appears. Tap the AirPlay icon in the top-right corner of the card, then choose your headphones from the list of playback devices.
  • Page 3 Press twice and hold on the second press to scan forwards through a track. Press three times and hold on the third press to scan backwards through a track. To control playback volume, use the volume buttons on the left ear cup or the RemoteTalk cable.

Table of Contents