Summary of Contents for Calico Craft Parts GARGOYLE
Page 1
ASSEMBLY INSTRUCTIONS – GARGOYLE HINTS & TIPS Always use a good quality wood glue. You may find low tack masking tape useful to hold things together while drying. Make sure you wipe away any glue oozes immediately with a damp cloth.
PARTS LIST Your kit will arrive with all the parts on sheets – you can paint/roller the parts before assembly if required but ensure you don’t get any in the joints/areas to be glued as this will make assembly more difficult. It can help to mask these areas off prior to painting.
Page 3
Attach the 2 body sides to the main spine/tail piece ensuring that all the slots line up Insert the 2 small shoulder/neck pieces onto which you’ll attach the skull Attach the 2 skull pieces so the nose joins at the front and flares out to the shoulder/neck joint ...
Page 4
Layer the front and back leg pieces Attach foot and claw pieces to the front legs Attach leg pieces to the main body struts Page 4 of 5...
Page 5
Glue wing pieces together Attach wing mounts to shoulder slots on the main body Attach wings to shoulder mounts Page 5 of 5...