Page 1
Radiorax Aviation Systems 228 West Bonita Avenue - Claremont, California 91711 Phone/Fax : [909] 981-0422 Email: sales@radiorax.com Installation Manual Dual Stack, Flanged Outer + Reduced Dimension Center Rail Tray Mount Kit RK2015-X Document P/N RKD2015-2 Revision A August 21, 2003 RAS Dual Avionics Stack Installation Manual : P/N RKD2015-2, rev.
Page 2
Radiorax Aviation Systems 228 West Bonita Avenue - Claremont, California 91711 Phone/Fax : [909] 981-0422 Email: sales@radiorax.com List of Revisions Revision Date Description Pages 06/24/03 Original Disposition 08/21/03 Removed Experimental kits, split Dual/Triple Stack 1,3-5 Installation Manuals, added hyperlinks RAS Dual Avionics Stack Installation Manual : P/N RKD2015-2, rev. A, August 2003...
Page 3
Introduction The Radiorax avionic support strut installation kit provides a straightforward retrofit for almost any aircraft. The following documentation is provided to install the Radiorax p/n RK2015 Dual Stack, Flanged Outer + Reduced Dimension Center Kit in your aircraft. Document #...
Page 4
ID apart, and centered on the avionics bay cutout. Verify an inside dimension of 6.30” between the strut faces. Use the Radiorax RT400 Rail Installation Spacer to lock the struts together and to facilitate the installation of the struts as an assembly.
Page 5
Radiorax support struts are affixed in a way which will bear the ultimate load factors of your aircraft. For trays not supplied with countersunk holes, dimple each mounting hole with a #6 dimple-die, or equivalent means.
Need help?
Do you have a question about the RK2015 and is the answer not in the manual?
Questions and answers