Advertisement
Quick Links
Advertisement
Related Manuals for Daniamant L160
Summary of Contents for Daniamant L160
- Page 1 L160, L161, L162 and L163 Mounting Adapter Plate Installation and Maintenance Instructions Description This Mounting Adapter Plate is designed to aid fitting the L160, L161, L162 or L613 bracket using the holes from an existing L40, L41B, L120 or L90 lifebuoy light bracket.
-
Page 2: Installation
Align the Mounting Adapter plate with the existing holes, and fix. Make sure that the plate is the correct way up. Refer to the picture on the front of this manual. Attach the L160, L161, L162 or L163 bracket using the supplied self tapping screws. Complete the installation in accordance with the instructions supplied with the lifebuoy light. - Page 3 L161 and L163 lifebuoy light Installation and Maintenance Instructions Description The L161 and L163 lifebuoy light is a system designed for automatic activation by the act of releasing the lifebuoy to which the unit is attached, such that the battery is activated when the light is pulled from its housing.
-
Page 4: Operation
Installation The L161 and L163 lights should be mounted so that when the lifebuoy is removed a direct pull is exerted on the lanyard thus ensuring that the light is withdrawn from the container and switched on. Screw the container to a secure location using all four fixing holes provided, making sure that when deployed the drop to the water is not greater than 76 metres. -
Page 5: Routine Service
Maintenance Routine service The L161 and L163 is maintenance free, but the following checks should be made periodically (e.g. annually): 1. Inspect visually to ensure the casing is undamaged and that no component parts are missing or damaged. If damaged, the unit is to be replaced. 2. -
Page 6: Health And Safety Information
Health and Safety information Daniamant lithiumpowered marine safety light systems have a design life of 5 years. The batteries are hermetically sealed pressurised primary Lithium/Manganese cells, and as supplied are electrically protected by a solid state device, and are environmentally protected by a moulded plastic housing. In this condition the units pose no definable hazard to health.