Advertisement
3.3 Sensor Calibration
Sensor Calibration is completed automatically when testing PCBA,
no need any calibration any more.
3.4 Sleep Mode
The controller enters into Sleep mode if it fails to get connection with
PS4 console after it's under search status for 30 seconds or if no
buttons pressed and no big movement of 3D analog for 10 minutes.
You can wake up the controller by pressing PS button.
3.5 LED Indication
Led indicators will enter into breathing light mode if the controller
is charging under power off status, and the color is random.
The light goes off when controller is full charged.
• Different light colors of each controller when several controllers
connected to one Console at the same time: User 1 blue light,
User 2 red light, User 3 green Iight, User 4 pink light.
• Stand-by mode: orange light
• Charge while playing: blue light
• Charge while in stand-by mode: orange light, and light goes off
when full charged
• Controller lose connection: white light
3.6 Wireless BT Connection:
3.6.1 A data-capable USB cable is required to wired connect the
controller to PS4 console for the first time you use this controller on
the current Console. Hold the PS button, the LED light bar will keep a
single color, connected successfuIIy,after the first time, hence you
can connect the controller to the Console wirelessly via BT.
3.6.2 One PS4 console can only support 7 BT devices at the same
time no matter it s connected wired or wirelessly.
www.PyleUSA.com
5
Advertisement
