Activating Network Connection; Using The Appliance Remotely - LG FD 309 Series Owner's Manual

Activating Network
Connection
1
Run the LG ThinQ application.
2
Select and touch the Dryer in the
application.
3
Press the Power button on the
control panel.
4
Press and hold Wi-Fi button for 3
seconds on the control panel.
• The Wi-Fi LED blinks during the
connection process.
Using the Appliance
Remotely
Remote Start
Use a smartphone to control your
appliance remotely. You can also
monitor your cycle operation so you
know how much time is left in the cycle.
Using this Function
1
Press the Power button.
2
Load the clothes into the drum.
3
Press and hold the Anti Crease
button for 3 seconds to enable the
remote control function.
4
Start a cycle from the LG ThinQ
application on your smartphone.
LG ThinQ Application
NOTE
• Once this function is enabled, you can
only start a cycle from the LG ThinQ
smartphone application. If the cycle is
not started, the appliance will wait to
start the cycle until it is turned off
remotely from the application or this
function is disabled.
• If the door has been opened, you
cannot start a cycle remotely.
Disable the Function Manually
When the function is activated, press and
hold the Anti Crease button for 3
seconds.
Download Cycle
Download new and special cycles that
are not included in the basic cycles on
the appliance.
Appliances that have been successfully
connected can download a variety of
specialty cycles specific to the appliance.
Once cycle download is completed in the
appliance, the appliance keeps the
downloaded cycle until a new cycle is
downloaded.
NOTE
• Only one downloaded cycle can be
stored on the appliance at a time.
29