Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Hutech KAI GTS9
Summary of Contents for Hutech KAI GTS9
- Page 1 GTS9(HT-K05A, K05B ) ASSEMBLY GUIDE...
-
Page 2: Table Of Contents
TABLE OF CONTENTS Stand Assembly ------------------------------- 5 Side panel Assembly ------------------------------- 6 Speaker Unit Assembly ------------------------------- 9 Back Cover Assembly ------------------------------- 10 Footrest Assembly ------------------------------- 12 Basic Operation ------------------------------- 13... - Page 3 Main Body...
- Page 4 Component...
-
Page 5: Stand Assembly
1. Stand Assembly 1.Connect power to the 2. Connect the IR sensor connector. (Use cable ties to secure depending on connection line status) massage chair so that the stand is in its original posture. Connector 3. Secure with 3 stand screws... -
Page 6: Side Panel Assembly
2. Side Panel Assembly 1.Connect the 3 airbag hoses (1 /2 /3 ) and two connectors... - Page 7 2. Side Panel Assembly 3. Press down and join the side panel in the 2. Hang on the side panel bracket joint and push in the direction of the arrow to join ※ Connect bracket first and join bracket. (#1,2 Same join method) direction of the arrow.
- Page 8 2. Side Panel Assembly 5.Cover the connection by 4. Tighten the side panel fixing screw using a 6MM of allen wrench. attaching the airbag part and the connector cover (nonwoven fabric)
-
Page 9: Speaker Unit Assembly
3. Speaker Unit Assembly 1.After connecting the 2. Align the position of the lower part of unit and the upper part of the side panel speaker cable left and right, and push it diagonally downward. secure it with a cable tie to the airbag cable so that it doesn’t get in the way... -
Page 10: Back Cover Assembly
4. Back Cover (Top) Assembly 1.Join the top of the Back Cover with a fixing screw. And combine the speaker device with a fixing screw as well. 2.Place the back cover in the lock position and pat to combine P.10... - Page 11 5.Back Cover (lower side) Assembly 2.Match the position of the back cover and 3.Secure it with 1. Push the back cover (bottom) into gently tap to combine it. the lower fixing frame of the massage four screws chair to secure the lower part. P.11...
-
Page 12: Footrest Assembly
6. Footrest Assembly 2. Connect the footrest joint, insert one directional clip, and then join the other 1.Combine the airbag cable with the connector (Check the direction side. accurately when connecting connectors P.12... -
Page 13: Basic Operation
6. Basic Operation P.13...
Need help?
Do you have a question about the KAI GTS9 and is the answer not in the manual?
Questions and answers